answersLogoWhite

0

In olden days of yore plaster was applied over wooen lath which gave the plaster something to adhere to . Thus a much heavier coat of plaster could be applied because of the space between the lathes. the next day a second coat was applied called the skim coat because it's only purpose was to fill in the imperfections left from the first coat. fast forward to now the plaster comes in sheets much the same as sheetrock ex cept it is blue, and rightly called blueboard , after the hangers screw the bluboard to the wall and ceiling a team of plastererscome in and put a skim coat of plaster over the whol board, the joints require a heavier coat. After this coat dries in a couple of hoursor less the plasterers come back and apply a veneer thickness to the wall and dampen the plaster with a brush being waved in front of the board.Thus completing the plaster job. Now a oldtime plasterer like my brother-in-laws brother is a real plasterer and I was lucky enough to have him plaster my house when we built it, would walk off a job if they wanted him to use blueboard., as he is a old time plasterer who is an artist as he makes crown mouldings an other plaster designs on top of a coulple of inches thick.of base plaster. if you get a chance to see a real plaster job and a blueboard job you can tell the difference and both shine over sheetrock and compound job.

User Avatar

Wiki User

13y ago

What else can I help you with?

Continue Learning about Art & Architecture

What is the Skim coatings market?

Skim Coating is applying a very thin coating of epoxy on a wall before applying a service covering such as wallpaper. The skim coatings market are the users of such epoxies and plasters.


What is a SKIM key?

SKIM is an acronym for Sentry Key Immobilizer Module. It is Chrysler's design for a factory anti-theft system. In a vehicle equipped with a SKIM system, the engine will not start without the proper key that has been programmed to the SKIM, which transmits the information to the PCM (Powertrain Control Module).


Can you skim coat over gloss paint?

Assuming you are using a dye-based spray on stain, yes, if the gloss is already set up and scuffed! However,while spraying or applying, gloss is too wet/tacky to work with between coats! As I do at work using Acrylic Polyurethane paints onto cabinet parts, your best bet is to apply a first coat of satin, stain over that, then a final coat of satin to seal the stain! (NEVER apply gloss over an unsealed dye based stain, as the heavy material will have a tendency to pull your stain and make the color look uneven!) As soon as the satin is flashed off (10-30min, depending on paint and temp.) you can apply your gloss. This is the method we have used for decades on HIGH quality cabinets!


Can you paint over wallpaper successfully?

Are you planning to paint over the wallpaper? Make sure there are no loose ends or bubbles in the paper. Latex flat or satin paint will work but you will see the seams in the wallpaper and the paint may cause the paper to lift off the wall. Better to remove the paper first for the best look and most durability. I had to paint over paper and decided to texture the wall first with a skim coat of plaster. Doesn't look bad but a LOT of work!


What kind of paint do you use to paint a skim board?

I would use a good hard enamel like Tremclad (available in Home Depot) and if you're painting a design on it I'd protect that with a good clearcoat.

Related Questions

What the Difference between plaster and skim coat?

They are the same thing. A skim means just a thin finishing coat of plaster about 3mm or so thick, just enough to cover any minor imperferctions on the wall.


What the difference between Scan and skim?

the difference is that scan is when your scanning some or something and skim is a thin layer of a substance on the surface of a liquid


What is the process for applying a concrete skim coat to a wall?

To apply a concrete skim coat to a wall, first, clean and prepare the surface. Mix the skim coat material according to the manufacturer's instructions. Apply the skim coat evenly using a trowel, starting from the top and working your way down. Smooth out the coat with a trowel or a float. Allow the skim coat to dry completely before sanding or painting, if desired.


What is the best technique for applying a skim coat using a skim coat tool?

The best technique for applying a skim coat using a skim coat tool is to spread the compound evenly in thin layers, working in small sections at a time. Use long, smooth strokes to create a smooth and even finish.


How do you apply a skim coat to a plaster wall?

To apply a skim coat to a plaster wall, start by cleaning the wall and repairing any cracks or holes. Mix the skim coat material according to the manufacturer's instructions. Use a trowel to apply a thin layer of the skim coat to the wall, working in small sections. Smooth out the coat with the trowel, making sure it is even and free of bumps. Allow the skim coat to dry completely before sanding and applying a second coat if needed.


What is the process for applying a skim coat to a concrete wall?

To apply a skim coat to a concrete wall, first clean the surface thoroughly. Mix the skim coat material according to the instructions. Apply the skim coat evenly using a trowel, working in small sections. Smooth out the coat with a trowel or a float. Let it dry completely before sanding or painting, if desired.


How to skim coat a plaster wall effectively?

To skim coat a plaster wall effectively, follow these steps: Clean the wall surface thoroughly to remove any dirt or debris. Mix the skim coat compound according to the manufacturer's instructions. Apply a thin layer of the skim coat compound to the wall using a trowel or putty knife. Smooth out the skim coat evenly across the wall surface. Allow the skim coat to dry completely before sanding it smooth. Repeat the process if necessary to achieve a smooth and even finish. By following these steps, you can effectively skim coat a plaster wall to achieve a professional-looking result.


What are the steps involved in applying a cement skim coat to a wall surface?

To apply a cement skim coat to a wall surface, follow these steps: Clean the wall surface thoroughly to remove any dirt or debris. Mix the cement skim coat according to the manufacturer's instructions. Apply a bonding agent to the wall surface to help the skim coat adhere. Use a trowel to spread the skim coat evenly over the wall in a thin layer. Smooth out the skim coat with a trowel or float to create a flat and even surface. Allow the skim coat to dry completely before applying any additional coats or finishes.


What is the difference between Milk and skim milk?

Skim Milk contains less fat, they skim off the butter fat, which mack whole milk fattier.


How to effectively skim coat concrete for a smooth and even finish?

To effectively skim coat concrete for a smooth and even finish, follow these steps: Clean the concrete surface thoroughly to remove any dirt or debris. Mix a skim coat material according to the manufacturer's instructions. Apply the skim coat evenly using a trowel or squeegee, working in small sections. Smooth out the skim coat with a finishing trowel or float to achieve a flat and even surface. Allow the skim coat to dry completely before applying any additional coats or finishes.


How can walls be smoothed without plastering?

One way to smooth walls without plastering is by using a technique called skim coating. Skim coating involves applying a thin layer of joint compound or drywall mud over the existing wall surface to create a smooth finish. This method can help to fill in imperfections and create a more even surface without the need for traditional plastering techniques.


How can I effectively apply a skim coat to plaster walls for a smooth and flawless finish?

To effectively apply a skim coat to plaster walls for a smooth finish, start by cleaning and prepping the walls. Mix the skim coat to a creamy consistency and apply it using a trowel in thin, even layers. Smooth out any imperfections as you go. Sand the walls lightly between coats for a flawless finish.