You use the low power lens to find the specimen with a microscope. Once you have found the specimen on low power, you can switch to high power for greater magnification. Just be sure to use only the fine adjustment knobs for focusing on high power so the high power objective won't hit the slide.
In a simple microscope, a lens magnifies the image of the sample. in a compound microscope, the objective lens magnifies the image (there may be more than one objective lens) and the eyepiece lens enlarges the virtual image (which is typically inverted by the objective lens).
A telescope must gather large amounts of light from a dim, distant object; therefore, it needs a largeobjective lens to gather as much light as possible and bring it to a bright focus. Because the objective lens is large, it brings the image of the object to a focus at some distance away
Light waves are bent as they travel through glass increasing the ability to see items at a much more magnified level. First, we have to light up the specimen. A mirror mounted under the microscope stand does the job. Light bounces off the mirror, passes through and around our specimen (mounted firmly to a microscope slide), and into the objective lenses. These lenses bend some of the spread out light beams from the specimen into straight line paths that travel through the microscope tube. Next, the light beams reach the eyepiece lenses. These lenses bend the light back into your eye, so you can see the specimen up close.
When being used in photography, a telephoto lens is used as a long focus lens. This means that the focal length of the lens is longer than the physical length. This type of lens is often used for photography of animals.
camera used for cricket are DSLR Cameras where it must have more FPS that is frames per second like 30fps or 60fps and lens used are zoom lens or wide lens
low power objective! :)
The part of the microscope is called the Condenser
The mirror, which can also be called the light source. It reflects the light.
Oil immersion is a technique used to increase the resolution of a microscope.
A light microscope uses lens to see living cells.
The light microscope and the electron microscope refers to the type of microscope that is used to view the non- living specimen. The non-living specimen is usually placed in a slide.
When viewing a specimen through a hand lens, you can see in slightly greater detail than your naked eye, but you may not be able to see micro organisms. With a microscope, you can see things in MUCH greater detail, and you can see micro organisms. With a hand lens, you cannot change the power of magnification, while with a microscope, you can change the power of the magnification. With a hand lens, only one lens is used to magnify an object, while a compound microscope uses two lenses (one in objective lens, one in eyepiece). With a hand lens, you can view a specimen from far away, while an objective lens has to be fairly close to a specimen in order to view it clearly. With a hand lens, you can simply move your hand forward, or backward, to focus on an object. With a microscope, a very complex mechanism is used in order to portray some sort of depth while viewing. This is adjusted by using a coarse, and a fine adjustment knob.
im working on the same worksheet too, its lowpowerobjective :D
The function of a condenser lens is to focus the light onto a specimen. Condenser lenses are most useful at the highest powers of 400 x and above. Microscopes with a condenser lens render a sharper image than those with no lens. These lenses are able to move up and down.
An optical microscope used in a laboratory would have 3 different types of lenses.They are :-(1) Condenser lens- directs light to the specimen if there is no in built light source.(2) Eye piece - lens close to the eye of the observer which magnifies the image created by the objective lens.(3) Objective - These are the lenses which are positioned closest to the specimen mounted on the stage of the microscope which magnifies the specimen. There could be several objective lenses in an optical microscope, generally three. The low power objective (usually magnifies 4 times), mid power objective (usually magnifies 10 times) and the high power objective (usually magnifies 40 times).
When viewing a specimen, you must always use the lower power objective lenses first. Low power lens gives the widest field of view and makes it easier to find the specimen when you look through the microscope. Finding the specimen at high power, without first centering it in the field of view at low power, is nearly impossible.
The light microscope and the electron microscope refers to the type of microscope that is used to view the non- living specimen. The non-living specimen is usually placed in a slide.