Minimum disc thickness vented front 24.6mm .Minimum disc thickness rear 16.6mm. min pad thickness front & rear 1mm
My guess would be wheel balance.
find the marks on the pullys, they should line up with the 01234 marked on the faceplate of the timing belt cover, should show to be on 0 i beleive. use a timing gun
AGE ! if it is low compression and not no compression then your piston rings and valves are worn too much and the engine probably needs to be rebuilt.
i have no idea what type of motor that the troope even has but your exhuast manifold is gonna be under the hood and the very starting point of your exhaust(the part that touches the motor and gets real hot real quick)
Yes, there is a diagram of a 1992 Toyota Corolla Engine. This diagram can be found in the cars specific maintenance manual, found in auto part stores.
The Manufacturer specification lists the front rotors as 1.020" new, & 0.969" minimum (discard). A refinish minimum is 0.983"
wear gloves, bearings all come out. then you have to remove the sensor off the back of it. along with 6 17mm bolts. How do you change the rotors in the front on a 1998 Isuzu Trooper
Isuzu Trooper was created in 1981.
1999 Isuzu trooper
timing marks for 1996 Isuzu trooper
The 6VE1 3.5L V6 fitted to the Isuzu Trooper was manufactured in-house by Isuzu themselves
The trooper is made by Isuzu
Remove Camshaft fro isuzu trooper 1996
will a 3.2L 2000 Isuzu Trooper engine fit a 3.2L Isuzu rodeo transmission
The sister vehicle of the Isuzu Trooper is the Acura SLX
were is up shift relay on isuzu trooper automatic tramission & what does it do
How do you change the transmission fluid on a 2001 4x4 Isuzu trooper