Normally the second switch in a bathroom is the control for the bathroom's exhaust fan. The exhaust fan removes bad odors and humidity from the bathroom, and is on the ceiling of the bathroom.
Hi, The first step I would recommend would be to get a quote. Have a look at http://www.elyfe.com/remodeling.html where you can get some free quotes from contractors in your area.
A lever in a bathroom can flush your toilet or open a faucet.
one lever in a bathroom is a toilet lever hope that helps:)
Bathroom fixtures are the tub, sink, toilet, bidet and faucets.
In my case it was the ignition switch itself had overheated and seized up. Replace the switch (have to lower the column, disconnect the wiring plug from the switch, and remove/replace the switch.) Clean all connections to the switch, make sure they're connected solidly and not heating up again.
That's one I've never seen. Does the bathroom light turn ON when the bedroom light is switched Off? Does the bathroom light switch turn the bathroom light on and off normally when the bedroom light switch is left on? Need to answer these questions, then find where the bathroom light power comes from. It's power supply should either go directly from the power oanel to the bathroom light or to the bathroom light switch. The bathroom light switch merely acts as an interrupter for the hot leg of this power supply.
The purpose of a bathroom fan switch is to control the ventilation system in a bathroom. When the switch is turned on, it activates the fan to remove moisture, odors, and pollutants from the air. This helps to improve air quality and prevent mold and mildew growth in the bathroom.
can i have an electric rocker switch in the bathroom
u don't, just replace the switch with a new one.
To install a timer switch for your bathroom fan, first turn off the power to the fan at the circuit breaker. Remove the existing switch and connect the timer switch according to the manufacturer's instructions. Mount the timer switch in place of the old switch and restore power to test its functionality.
in the bathroom
When choosing a vanity light with a switch for a bathroom renovation, look for features like adjustable brightness, energy efficiency, water resistance, and a design that complements the overall aesthetic of the bathroom.
The purpose of the bathroom exhaust fan switch is to control the ventilation system by turning the exhaust fan on and off. When the switch is turned on, it activates the exhaust fan, which helps remove moisture, odors, and pollutants from the bathroom. This helps improve air quality and prevent mold and mildew growth.
If you have any condition in your bathroom where a switch is malfunctioning you need to replace the switch or the device that is causing the problem. This is very dangerous in a bathroom because of the increased danger of shock because of moisture.
A light switch in the bathroom is typically designed to be more resistant to water and moisture compared to light switches in other areas of the house. This is to ensure safety in a potentially wet environment like the bathroom. Additionally, some bathroom light switches may have built-in features like a timer or a dimmer switch to provide additional functionality.
It sounds like the feed for the kitchen is fed through the bathroom switch box. The black feeding the kitchen light is connected to the wrong side of the switch. There should be two black on one side of the switch and one on the other. One of the two blacks need to be moved to the other side of the switch. **BE VERY CAREFUL or CALL A LICENSED ELECTRICIAN** Even with the switch OFF the live side of the switch will be LIVE!!
A second bathroom, always. Buyers look for more space, more luxury, something better than the average.