0
What else can I help you with?
What is a fold line in technical drawing?
A technical drawing will show all the surfaces that are to be modified, say for example by machining. The various views, like top, side and front are put on the page in a location such that if the page was folded the views would be in the correct location as if looking at the part through the walls of a glass box.The fold line is the line where you would fold the page to make the various drawing views come out in the proper location.The fold line is often a dashed line as long as the part with 2 long and 2 short dashes.A view can also be made of a surface (or plane) that is not right angles to the other views. This is helpful for a machinist setup where the part is mounted square to their cutting tools.No matter what drawing standards say, if the drawing is not clear for its intended purpose, it must be changed in any manner needed to make it clear.BuckBuckAutomation.com
What is the symbol for surface finish on an engineering drawing?
The symbol for surface finish on an engineering drawing is typically represented by a series of lines and a number, known as a surface texture symbol. It includes a basic symbol with a horizontal line and may feature additional elements like arrows or a roughness value (Ra) to specify the required surface finish. The symbol conveys important information about the desired texture and quality of the surface, which is crucial for the part's functionality and aesthetics.
What is slant line in drawing?
Slant line is a line which is not horizontal or vertical. In drawing they help to form proportional objects.
What is a line drawing?
Contour-line drawing refers to drawing the outline of something,usually a human figure. Matisse has many examples of this.
What is the type of drawing in which the artist draws the edges of figures or objects?
Contour drawing a is a type of line drawing that uses line and not tone to indicate form and features.
Where in drawing a center line is used?
In a drawing, a centre line is used to show the centre of a part.
What is the drafting symbol for center line?
The drafting symbol for a center line is typically represented by a long dashed line with alternating long and short dashes. The long dashes are usually twice the length of the short dashes, and the line often has a specific width to distinguish it from other types of lines. Center lines are used to indicate the axis of symmetry for objects and to help in the layout of components in technical drawings.
In an architectural drawing where CL is center line what is PL line?
PL is Poly Line which is a continuous line that while drawing it with pressing right click of the mouse you can choose to draw arch or line or . . . CL is Centerline and used in Working Drawing which is the final stage of a Drawing and has to be accurate and without mistakes. CL is used to show the center of the mail walls of each floor and while measuring, you will use the the Center to Center (c/c) dimansions instead of outer or inner surfaceof the walls. I hope this can help you
What is radius line in drawing?
In drawing, a radius line is a line that represents the radius of a curve or circle, extending from the center point to the edge of the shape. It is often used in technical and engineering drawings to indicate the size of arcs or circular features. The radius is crucial for ensuring accurate measurements and proportions in designs. Additionally, radius lines help in understanding how elements will interact in three-dimensional space.
What is center line of building drawing?
The center line in a building drawing is a reference line that defines the central axis of a structure or component. It is used to ensure symmetry and alignment in the design and construction processes. Center lines help architects and builders accurately position walls, columns, and other structural elements, facilitating precise measurements and layout. They are typically represented as long dashed or dotted lines on architectural plans.
How do you lay out 45 degrees on a circle?
you take the center of a circle draw a straight line up ( radius ) and make it a 45 degrees by drawing another line forming
Is center line one word or two words?
"Center line" is typically written as two words. However, in specific contexts, such as engineering or technical fields, it may occasionally be hyphenated as "center-line." It's best to follow the style guide relevant to your specific use case to ensure consistency.
When was Drawing the Line created?
Drawing the Line was created on 1915-08-23.
How do you read a civil drawing?
Before reading any civil drawing we must understand the purpose of each line, word, symbol, appreviation and specification referred to, as to indicate the construction team required to do the attempted works.
What are the rules for determining line of sight in Star Wars: Imperial Assault?
In Star Wars: Imperial Assault, line of sight is determined by drawing an imaginary line from the center of one figure's space to the center of another figure's space. If the line passes through any blocking terrain or figures, then line of sight is blocked.
What is a center line is used to indicate?
A center line is used in technical drawings and engineering to indicate the symmetry of an object or to define the center point of a feature. It helps in aligning components accurately and ensuring proper placement during manufacturing or assembly. Typically represented as a dashed line, center lines are essential for maintaining precision in design and fabrication processes.
What is a fold line in technical drawing?
A technical drawing will show all the surfaces that are to be modified, say for example by machining. The various views, like top, side and front are put on the page in a location such that if the page was folded the views would be in the correct location as if looking at the part through the walls of a glass box.The fold line is the line where you would fold the page to make the various drawing views come out in the proper location.The fold line is often a dashed line as long as the part with 2 long and 2 short dashes.A view can also be made of a surface (or plane) that is not right angles to the other views. This is helpful for a machinist setup where the part is mounted square to their cutting tools.No matter what drawing standards say, if the drawing is not clear for its intended purpose, it must be changed in any manner needed to make it clear.BuckBuckAutomation.com
