0
What else can I help you with?
What thread do they use to do magic?
normal thread is used, the thread used in Tailor work. It is just the way they use it, it seems magic.
When done with an embroidery how do you pull the top thread through to the underside to tie it off?
You thread a needle with the thread you want to pull through, pass the needle into the material slightly within the margins of the pattern and pull the thread through. You don't really have to pull the top thread through to tie off because the stitch density is high enough to lock the thread, you can clip close. If you feel the need, unpick a few stitches (don't rip them, unravel the top and bobbin threads) until you have enough length to work with, pull the top thread through the fabric with the bobbin thread ad tie them together. When you change top thread, lay a short tail of the previous color and the new thread across the next pattern section and the thread will be locked. Same idea when you change the bobbin thread
How do you thread a universal sewing machine model kat?
The thread must come from the FRONT of the upright spool on the back of the machine. Thread through the small eyelet on the back (nearest the spool(s), projecting from the top), then through the thread guide at the front of the machine. If you are using a double needle (therefore two spools of thread), the thread from the left-hand spool should go through the top hole and the thread from the right-hand spool through the bottom hole. Come down to the tension disks. Bring the thread through the back disk, up again under the wire guide, and down under the thread guide that is just to the left of the tension disks. Bring the thread through the eye of the take-up lever (the piece that moves up and down when you sew) from RIGHT to LEFT. Guide the thread back down through the thread guide next to the tensioner. There is a little thread guide just inside the door on the left side of the machine; bring the thread through this guide. Then pull the thread through the wire guide above the needle (it's easiest to hold the thread horizontally to do this). Thread the needle front to back. HTH. YMMV.
Can you use sewing thread to bead with?
Beading thread is usually finer (thinner) and stronger than sewing thread. There are so many different kinds of sewing thread, it's hard to answer your question. Using the correct thread for the project is important in you want your work to last. You can get a sense of pride for a job well done.
What is the purpose of the bobbin clutch nob on the sewing machine?
the purpose is to have a thread holder that connects the thread to the needle
This is uesd to enter information and instruction into the computer?
A keyboard
What where machine guns uesd for in ww1?
Kill people
What is sulfur uesd for?
sulfur is used for gun powder and protein
What was papyrus uesd for?
it is used for making paper in ancient Egypt
What is nitrogen uesd for?
fertilizers explosives neat chemistry experiments.
What is uesd to measure the strength of earthquakes?
The Richter scale and Magnitude
What is the cotton uesd for?
It is used for light weighing clothes which is mostly used in textiles
Where did Ryan follese live?
Ryan follese uesd to live in Nashville Tennessee
Can glaucoma patients take cialis?
No. Above drug should not be uesd if you have glaucoma.
What did the U - Boat use to sink the neutral merchant ship?
i have no clue
What were hieroglyphics uesd for?
hieroglyphics were used to show language in a mainly picture oriented society.
What was pi first uesd for?
It was first used to find the circumferential of a circle as far as i know.
