0
I have used 320 grit all-purpose sand paper. But if you find this isn't removing the brass, you can go to a 240 grit or so. Remember you are only scuffing the surface, it is just to remove the gloss so the primer has something to adhere to. I have used 320 grit all-purpose sand paper. But if you find this isn't removing the brass, you can go to a 240 grit or so. Remember you are only scuffing the surface, it is just to remove the gloss so the primer has something to adhere to.
What else can I help you with?
Are polished brass bathroom fixtures outdated?
No, BUT the finish do not last as ling as chrome and they look like crap after a few years
How do you remove shellac off of old brass door hardware so you can polish and reuse?
With a quality paint stripper, follow the directions on the container.
What is brass an example of?
meatl
How abundant is brass?
Brass is an abundant alloy and is found in locations throughout the world. Because it is abundant it is relatively cheap.
Which is stronger steel or brass?
Steel is stronger.
How do you paint over brass lacquer on fireplace doors. Must you remove old finish or just prime and spray with a high heat paint?
You must rough up the old finish, use sandpaper. Then apply the heat resistant paint
What materials are fireplace doors typically made of?
Fireplace doors are typically made of brass, an alloy of Zinc and Copper. They can be made of other alloys and metals, however, brass is very advantageous as a fireplace door material as it gives a great finish, its strong, easy to clean, non-corrosive, and most importantly heat resistant.
What are the benefits of installing a brass fireplace surround in your home?
Installing a brass fireplace surround in your home can add a touch of elegance and sophistication to your living space. Brass is a durable material that is resistant to corrosion and tarnishing, making it a long-lasting and low-maintenance option for your fireplace. Additionally, the reflective properties of brass can help to enhance the warmth and ambiance of your fireplace, creating a cozy and inviting atmosphere in your home.
Are copper fireplace sets better than brass?
Copper fireplace sets are better in sense that it has a higher melting point than brass. On the other hand copper has a more dull color than brass and is harder to polish. Since the sets will be outside away from the fire, brass sets are more beautiful and easier to clean.
Is there any way to remove scratches from a brass instrument?
Not really. If it's that big a concern, the only way to get rid of them is to strip the horn's finish and get it replated.
How can I effectively stain brass to achieve the desired finish?
To effectively stain brass and achieve the desired finish, you can use a combination of chemicals like ammonia or vinegar to create a patina. First, clean the brass thoroughly, then apply the staining solution and allow it to sit for a desired amount of time. Finally, rinse off the solution and polish the brass to bring out the desired finish.
When installing pipes do you use brass?
Yes especially on finish work as Chrome plated Red brass is the right job
How would you separate wood shavings from brass nuts?
I'd get a magnet and remove the brass with that.
How do you remove polyurethane from brass?
To remove polyurethane from brass, you can use a solvent such as acetone or denatured alcohol. Apply the solvent to the polyurethane with a soft cloth or brush, let it sit for a few minutes, and then scrub the affected areas until the polyurethane is removed. Be sure to clean the brass thoroughly afterward to remove any residue.
Can brass be powdercoated?
Yes, brass can be powder coated. Powder coating can provide a durable and decorative finish for brass surfaces, helping to protect against corrosion and wear while providing a variety of color options. It is important to properly clean and prepare the brass surface before powder coating to ensure good adhesion and a high-quality finish.
How do you remove stains from a brass sink?
with Brasso
What type of screws should I use to secure the brass hinges to the wooden door?
For securing brass hinges to a wooden door, it is recommended to use brass screws. Brass screws are durable and match the material of the hinges, providing a secure and aesthetically pleasing finish.
