From my experience, electric paint guns such as the Wagner Power Sprayer perform poorly. In a word, they suck. I've found that if you add a little paint thinner to your paint they tend to work a lot better. If you want a nice job, try to rent a commercial grade airless paint sprayer. It does a lot better job and wastes a lot less paint. Reserve the unit and make sure all your prep is done. The units frequently rent by the hour. Bring it home, blow on your coating, and take it back.
You should be able to use a gravity feed HVLP spray gun to spray latex paint as long as the volume is at least 12 CFM. Check the paint's data sheet to determine the proper thinning required.
probabaly i guess u could
You can always go to MACO and have them paint your car. If you want to paint it yourself you can use Rustoleum and apply it with a paint roller or use a professional air gun.
mineral spirits.
liquid, gas-charged, pressurized, wet, enamel paint, or lacquer
Spray paint guns are usually used to paint things like cars. I wouldn't recommend using one for inside jobs. You should use regular paint, and paint it on there, or take the table outside and use spray paint. You don't need an industrial paint gun.
If you play airsoft, then no. It should be a non-reflective colour that matches the area(s) you play in, to reduce the chance of being seen (green usually works best. If you do not play airsoft, paint it any colour you want. try to use krylon camouflage paint to use on your airsoft guns. See the link below
You will need to use a spray gun when painting your vehicle yourself. This will ensure that you get a nice even coating of paint. You should make your decision based on your financial situation. You do not necessarily need to buy a top of the paint gun if you are only going to need it for personal use.
you can't there isn't a gun
You should be able to use a gravity feed HVLP spray gun to spray latex paint as long as the volume is at least 12 CFM. Check the paint's data sheet to determine the proper thinning required.
It depends on what spraypaint you use. You have to use a special guitar paint. But it's not safe to use regular paint.
use a nail gun to pin it down and paint it.
no
It depends on what kind of gun you have. If it is a spring pistol or a mini electric, then you should use .12 gram bbs. If the gun is a LPEG (low power electric gun, such as those found in Walmart), then you should use .2 gram instead, as the power in the gun can break the .12 and pieces can get stuck in the gun. If the gun is a MPEG (mid power electric gun), HPEG (high power electric gun), or gas pistol, then it is recommended to use high quality polished bbs, especially for the HPEG, as these guns are very expensive and cheaper made ones can jam it. They should be around .2 to .25, depending on the power of the gun. For sniper rifles, they should use .2 and higher; these are very strong and heavier bbs allow for greater accuracy but less speed. You can find all these at a sporting goods store or airsoft store, but it is recommended to go to the airsoft store because they will have knowledgeable staff able to help you make the right decision.
use a heat gun and a soft plastic scraper and keep the heat gun moving so you dont wreck the paint
Wheels typically have a high heat resistant paint or a powder coating. A heat gun is not likely to have any affect.
probabaly i guess u could