tension control
Spoon pin
The motion of the needle in a sewing machine is vertically, rapidly up and down.
The screw that tightens to hold the needle in place, and loosens when you want to change the needle.
use the sharpest needle, and a sowing machine
It is best to check your user manual. Different fabrics sew better with various needle selections.
If you want to replace the needle on your sewing machine, you unscrew the thumbscrew behind and above the needle (with the presser foot down) and remove the old needle. Then hold the new needle under there with the point down and insert it into the slot. The slot is usually half round, half flat so you have to be sure the flat part of the needle matches the flat part of the slot. When it is in there, you just finger tighten the thumbscrew and you are ready to go.
a needle does is a machine
holds the needle
holds the needle
The motion of the needle in a sewing machine is vertically, rapidly up and down.
Wedge
motion of the needle of a sewing machine is what is the motino is this?
The needle bar is a component of a sewing machine that holds the needle in place and controls its up and down movement. It is connected to the machine's mechanism that creates the stitch by moving the needle in synchronization with the fabric being sewn.
The screw that tightens to hold the needle in place, and loosens when you want to change the needle.
NEEDLE
Wedge
zigzag machine
The machine that has a needle that goes from side to side is an overlock serger. It is used to prevent fabric from fraying.