answersLogoWhite

0


Best Answer

There are several different sizes of vacuum hoses in the 89 Accord. The hoses are at various places in the engine bay and under the dash, and sizes can range from 1/4 inch to 3/4 inch diameters.

User Avatar

Wiki User

9y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What the size of the vacuum hose on 89 Honda Accord?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Art & Architecture

Where can you find a schematic for vacuum hose system?

AnswerIf you expect an answer it would be of great help to know what make, model, and engine size in the vehicle you are asking about. Otherwise you will not receive an answer as they are all different.As already stated, depending on the year, make, model and engine, emission related vacuum line routing is displayed on a white sticker in the engine compartment in many vehicles.


Can the metal gas line be cut and extended with rubber hose with hose clamps or is the pressure too high?

AnswerIt has to be proper fuel line hose(printed right on the hose) and double clamp each end with hose clamps....pressure is about 8 lbs............... Depending on the year and make and engine size, some systems have 60 to 66 psi in that fuel line and adding a hose with clamps is not a good idea.


What size wrench changes a Honda civic thermostat?

i dont know exact size wrench but if you are having trouble making wrench fit, u need to use metric wrench


What is tire size on 1998 Honda Civic ex?

Stock rim tire sizes on a 1998 Honda Civic EX are 185 65 R14 although some have reportedly installed and prefer 195 60 R14, other sizes will likely to rub in full turn.


02 GrandAM at startup the engine starts then stalls or engine starts then idles revs up and down you have to give it gas or it will stall After it runs for a few secs its ok Do I need Plug wires?

Please specify what model year and engine size, or just check for _vacuum leaks_ or a failed IAC. Note that a leaky intake duct (snorkel) from the air filter housing (or a clamp on same) is also a vacuum leak. A failed IAC cannot cause a stall if you press the accelerator (gas) pedal just a bit. Insufficient fuel pressure can also cause this sort of problem. Common causes for insufficient fuel pressure are a failed pump, leaky pulsator or pickup hose, low fuel level, active anti-theft immobilizer, or faulty fuel pressure regulator. A clogged filter can also lead to low pressure, but not at initial startup. Check for vacuum leaks first. SRSly.