0
PT Boat
Anonymous
Add your answer:
Earn +20 pts
What was the numbers on Douglas MacArthur's jeep?
He did not ride in the same Jeep all the time. Depending on where he was he rode in a Jeep chosen for him at that location.
A type of boat that start with k?
Catamaran (multihulled boat or ship)
What actors and actresses appeared in The Speeches of Douglas MacArthur - 1995?
The cast of The Speeches of Douglas MacArthur - 1995 includes: Douglas MacArthur as himself
What is the birth name of Douglas MacArthur II?
Douglas MacArthur II's birth name is MacArthur II, Douglas Arthur.
Where did Douglas Macarthur get the nickname the dude?
Douglas MacArthur had the nicknames Doug and Dougout not Dude.
What is the name of the boat that the pilgrims rode in?
The name of the boat that the pilgrims rode on is called the Mayflower.
Who rode the island boat?
abraham lincoln
How did English get to Africa and Nigeria?
they rode a boat
What was the name of the boat Che rode on from Mexico?
The Granma
When did Vasco the Gama start his journey?
he got on boat and after the boat he got on the bike and rode to longisland
First president who rode a steam boat?
James Monroe
What was the numbers on Douglas MacArthur's jeep?
He did not ride in the same Jeep all the time. Depending on where he was he rode in a Jeep chosen for him at that location.
What is homophone for rode?
road: "We travelled on the road". rowed: "We rowed the boat."
What is proper technique for anchoring a boat?
Type your answer here... Lower your anchor, put the boat in reverse and backup until the flukes dig in, tie it off and your done.Didn't work? That's probably because:1. Proper sized anchor for the boat.2. 5 feet of chain attached between the anchor and the rode (rope)3. 5 - 10 times the depth is the amount of rode must be played outThe chain and length of the rode are all about creating the proper angle of the rode in relation to the anchor and boat. If the anchor rode angle is too steep, it will pull the flukes out of the bottom, resulting in boat drifting.Approach the anchor position, head to wind or current.The vessel should be moving slowly astern before letting go.Lay the cable on the bottom, usually three times the depth, or more in rough weather.Pick a reference point on shore to gauge if you are dragging
What is the proper technique for anchoring a boat?
Type your answer here... Lower your anchor, put the boat in reverse and backup until the flukes dig in, tie it off and your done.Didn't work? That's probably because:1. Proper sized anchor for the boat.2. 5 feet of chain attached between the anchor and the rode (rope)3. 5 - 10 times the depth is the amount of rode must be played outThe chain and length of the rode are all about creating the proper angle of the rode in relation to the anchor and boat. If the anchor rode angle is too steep, it will pull the flukes out of the bottom, resulting in boat drifting.Approach the anchor position, head to wind or current.The vessel should be moving slowly astern before letting go.Lay the cable on the bottom, usually three times the depth, or more in rough weather.Pick a reference point on shore to gauge if you are dragging
How did nemo get to Australia?
A diver bagged him off the reef and they rode to land in his boat.
What is the homophone for rode?
road: "We travelled on the road". rowed: "We rowed the boat."
