0
What else can I help you with?
What is double pitched roofing?
A roof with two distinct slopes. Usually the upper part of the roof has a shallow pitch (slope) and the part near the wall is steep. A roof with two distinct slopes. Usually the upper part of the roof has a shallow pitch (slope) and the part near the wall is steep.
Low wall on a roof's edge?
Parapet
What do you call a low wall around a roof?
It may be called a 'parapet' or a 'pony wall'
Definition of a hip and gable roof combination?
A hip roof has a slope on all four sides. A gable roof only has it on two sides. On the short sides of the house the side wall goes up to the point of the roof.
What is a cantilever wall?
A cantilever wall is a free standing wall, meaning there is no support at the top of wall such as that given by a floor or roof diaphragm. Fences, property, or enclosure walls are typically cantilever walls.
Why do you get dark spots on the ceiling where the wall meets the ceiling?
Its mold its when your your walls get moist make sure they don't get bigger it means you have a leak in your roof!
What does eavesdropping mean?
Eavesdropping is listening in to conversations you are not a part of. The word comes from the eaves, the edges of the roof where it meets the wall. Formerly there was often a space betweeen wall and eave which enabled people to hear what was going on in the house.
What is double pitched roofing?
A roof with two distinct slopes. Usually the upper part of the roof has a shallow pitch (slope) and the part near the wall is steep. A roof with two distinct slopes. Usually the upper part of the roof has a shallow pitch (slope) and the part near the wall is steep.
What do you call the horizontal part of a building?
The horizontal part of a building is called a "roof."
What is para pit wall?
A wall on top of a roof that forms an empty space behind it. From the front it will appear to be tall, but from behind the flat part of the roof will be several feet below the top of the wall.
How to cut a bird's mouth when constructing a roof truss?
To cut a bird's mouth when constructing a roof truss, use a saw to create a notch in the bottom of the rafter where it meets the top plate of the wall. This notch allows the rafter to sit securely on the wall and provide support for the roof structure.
What is the definition of eaves?
Eaves is the part of a buildings roof that overhangs the exterior wall.
The triangular part of a wall between the slopes of a double sloping roof?
gable end??
How do you fix ceiling condensation in a mobile home with shingle roof condensation is where the ceiling meets the wall in a few areas?
bird blocks and ridge vent
What is roof overhang?
Typically, it is the part that extends beyond the building wall, aka tail of the rafter. It creates the area where you can stand under the edge of the roof when it rains.
Why is your interior drywall joint wet?
Roof leaking, wall leaking, soffit leaking from ice buildup on roof. First thing would be to go into attic and see if there is any signs of water, if there are no signs of water that means it is coming from the outside wall .
What is the line where the ceiling meets the wall called?
The line where the ceiling meets the wall is called a cornice. A cornice can be set off from the ceiling with the use of cornice trim. The line where the wall meets the floor is called a baseboard.
