There are different types of molds and so different types of clay work best in specific molds. Plaster molds are generally used with clay in liquid form, known as slip. In this type of mold, the porous plaster absorbs water and the solid clay is deposited on the inside of the mold, allowed to stiffen and then the mold is disassembled and the casting removed and trimmed. Slump molds or hump molds are generally used with clay slabs and the clay depends on what you are looking for in the end results: porcelain, stoneware, low-fire clay etc.
you can use modeling clay, well at least that is what i used
If you intend to fire the clay item the following sometimes works:- Mix a little powdered clay with some sodium silicate and use as a sticky 'glue'. It is best to test this idea on scrap dry clay pieces and test-fire them to see the result before using on the best item. It may not always work and will not be invisible. Be warned!
you take a piece of clay and use it on a bucket of water, voila, soft clay.
I would use alcohol then re-due whatever the mold covered.
my opinion is that if your looking for good clay to make charms or keychains i advise you to use sculpy or fimo Soft dont get original its too hard but both Sculpy and Fimo are name brand and are really good. You can buy them at michaels or any other art supply store and remember to wash your hands and wipe down the surface your working on before you use any light colors because they can easily catch lint and dirt so be careful, Hope i helped Bye ;]~
Im assumeing your talking about the quest that you need the key.To do this just buy a key mould,it tells you where to...then get some clay and use it on the mold. Thats really the only use molding clay has in runescape.
I tried to mould the clay.
To create a clay pot mold for your pottery project, you can start by shaping the clay into the desired pot shape and allowing it to dry slightly. Then, carefully remove the clay from the pot shape and use it as a mold for future pots. Make sure to smooth out any imperfections and let the mold dry completely before using it for your pottery project.
The best materials for a metal casting mold are typically sand, clay, graphite, and ceramic. These materials are able to withstand the high temperatures and pressures involved in the metal casting process, ensuring a successful and accurate casting.
you could use a lot of things one is clay/play-dough which is easy to mold & use
You can get some clay n mold a big fat thick one n then put a condom over it so you dnt get clay in your couchie
Silicone and metal are the best materials for creating a shot glass mold.
No, it is not safe to use a cup that has mold on it. Mold can be harmful if ingested and can also be difficult to completely clean from the cup. It is best to discard the cup and use a new, clean one.
Use flo-X Mold and Mildew Cleaner for best results.
I have to make a model of a porcupine for my science project and what I'm planning to do is get some brown clay, mold the shape of a porcupine, then get toothpicks and stick them in the clay as the quills, and use black and white clay for details like eyes.
The best type of panettone mold to use for baking traditional Italian Christmas bread is a tall, cylindrical panettone mold made of sturdy paper or silicone.
The best way to get rid of black mold is to use bleach containing products. The mold causes severe allergic reactions in people who have breathing problems.