answersLogoWhite

0

It's behind the panel to the left of the cigarrette lighter. You need a Torx 25 screwdriver and another screwdriver for those hex shaped screws, forgot the size. First unscrew the 2 Torx 25 screws beneath the steering wheel. Then unscrew the rest of those Hex screws on the bottom. The panels overlap, so be prepared for a lot of unscrewing. You do need to unscrew the middle black panel on the bottom, right beneath the cig lighter. It's held by two Hex shaped screws, one on each side and are hard to unscrew. Also you need to remove your spare change sliding tray to unscrew the last hex looking screw. Once you pop your panel off, the turn signal flasher is the right one. The Hazard flasher is the left one. You can find a replacement part at Autozone, and DON'T get the $184 Flasher switch, all you need is the signal flasher. It's shaped like a cylinder with TWO prongs on it.

User Avatar

Wiki User

18y ago

What else can I help you with?

Related Questions

Where is the turn signal flasher on a '96 Chevy Blazer?

I believe it is in your glove compartment there is an access to your flasher.


How do you remove the front signal lights on a 2000 Chevy Blazer?

a repair guy needs to do that for you.


Do you have to remove anything to get to the turn signal flasher on a 1997 Chevy blazer?

Yes, you need to remove the plastic lower dash panel to gain access to the signal and 4-way flasher relays.


2001 Chevy Cavalier hazards lights flash but blinkers do not work is it the turn signal bulbs that need to be replaced or the flasher?

If neither signal light works, the flasher may very likely be the problem. The hazard lights and the signal lights work off different flashers.


How do you change a Chevy S-10 blazer turn signal?

More information is required to properly answer your question. Are you referring to the turn signal bulb, flasher or switch? SWITCH


What causes signal lights on my 2004 Chevy Classic not to work?

Could be flasher Common problem on this vehicle Flasher is part of the hazard warning module


Turn signals wont work Chevy blazer 1997?

If the turn signal bulbs light but will not flash, the flasher relay is defective, replace it.


Chevy s-10 turning lights not working?

First check the fuse, then the bulbs, then the flasher relay, then the signal switch.


Which flasher is for the turn signals on a 1997 Chevy blazer?

Need to clarify what you mean here. If you're referring to the lights themselves, both of the two bulbs in the top of the tail lamp housing are dual filament bulbs, which serve as parking lights, turn signal lamps, and brake lamps.


Is there a master fuse for the turn signals on a 95 Chevy Blazer?

Check the turn signal relay. The four way flasher and the turn signals each have their own relay. It has a fuse for the turn signal


Where is the signal flasher unit located on a 1990 Chevy lumina?

The 1990 Chevy Lumina signal flasher unit can be found beneath the drivers side dashboard. The signal flasher unit will be above the brake pedal.


Why does your 2000 Chevy blazer Turn signal flasher not shut off?

probably have a bad relay, that was my problem.. Are your turn signals not working, but your hazards lights are? and if so, do you hear a constant clicking sound, like your turn signal is turned on? Does the clicking sound go away when you hit the brakes? It is the relay.