answersLogoWhite

0

the brother LS2000 does

User Avatar

Wiki User

14y ago

What else can I help you with?

Continue Learning about Art & Architecture

What is the purpose of a bobbin in a sewing machine?

A bobbin winder is the part of a sewing machine that takes the thread from a spool of thread and winds it on the bobbin. The sewing machine bobbin is a mini-spool of thread, made of plastic or metal, that holds the thread that will be on the underneath portion of your fabric when you sew. The top thread comes from the spool of thread and the thread on the bottom side of your fabric comes from the bobbin. Instead of winding the thread on the bobbin by hand, long and tedious, the machine will wind it for you if you load it up correctly. Check your owner's manual for instructions. If you don't have a manual, do a google search for it by entering the name of your machine branch and the model # and it will probably find one. Also, any experienced sewer can show you how.


What year was Kenmore sewing machine model 1720 manufactured and what did it cost?

I bought this model not long after I graduated from High School and before I went to work at Sears. I graduated in 1971 and worked at Sears in 1973 and 1974, so I think it was probably in 1972. I still have mine and it still sews perfectly. You can find some of the parts online. I did have to replace the friction wheel on the bobbin winder and the foot controller.


How do you thread and install the bobbin on a singer 6251 sewing machine?

Put your spool of thread on the silver prong on the top of the sewing machine. Run the thread through the tensioner by following the arrows on the front of the machine (through the little clip at the top, down in the channel to the right of the 'auto tension', back up the other side of the 'auto tension', up to the top again, around the little groove there then down the other side of the groove). Thread the needle from the front then tuck the thread down and to the left so that it goes through the little channel on the foot. Then pull several inches of thread straight back. Wrap the thread once or twice around the little circular thing with the groove in it that is attached to the left side above the foot (sorry, I can't find my instruction book and I don't remember the name of that thing). Pull the metal plate back that covers the bobbin holder (the one with the little window in it) and put your bobbin in there with the stripes pointing up. Slide the metal plate back part-way so that the little arrow on the left of it lines up with the little arrow on the base of the machine. There will be a small gap where it is not closed all the way. Step on the pedal to run the machine and the bobbin should start to wind. You can look at your spool to make sure the thread is running. Keep an eye on the bobbin and don't wind it too full. When you have enough thread on the bobbin, let off the pedal, close the plate the rest of the way, unwind the thread from the round thing, and use something to sweep under the foot to draw the thread backward so that you pull about five inches of thread out the back of the machine. Trim all the ends of the threads so that you have two threads about 4" long--one coming from the needle and one from the bobbin. Then you're ready to go. Hope this made sense...and sorry if it was too much detail but I wasn't sure how much experience you've had with sewing.


What are the 3 major parts of the sewing machine?

A. The CabinetThe cabinet holds one or several drawers, an extension leaf, and a center drawer. There are used for storing or keeping important sewing materials, especially those that do not fit inside your sewing machine box.B. The Stand1. Treadle- it is where the feet rests while sewing-it puts into motion the drive wheel2. Drive Wheel- drives the balance wheel3. Belt Guide- holds and keeps the belt in place4. Drive Wheel Crank- turns the drive wheel5. Pitman Rod- connects the treadle to the brandwheel crank6. Legs- supports the standC. The Head1. Arm- used to carry the whole part and holdsimportant mechanisms inside.2. Spool Pin- holds the spool of thread and is foundat the top right of the arm3. Bobbin Winder- used for the lower threading4. Stop Motion Screw- used to release or tightenthe movement of the needle bar5. Stitch Regulator- used for reserve stitching- controls the length of stitch6. Balance Wheel- starts the mechanisms with thedrive wheel7. Belt- connects the balance and drive wheel8. Thread Guide- guides the upper threading9. Presser Bar Lifter- lowers and raises the presserfoot10. Presser Bar - holds the presser foot and needle11. Thread Take-up Lever- controls the flow ofneedle thread12. Face Plate- covers the left end head on whichthe needle bar is located13. Upper Tension- regulates tightness or loosenessof the stitches.14. Needle Clamp- holds the needle in place15. Presser Foot- holds the fabric against the feeddog16. Feed Dog- moves the material as it stitches17. Throat Plate- gives the needle access to thelower thread18. Bobbin- holds the lower thread19. Bobbin Case- holds the bobbin place20.Feed Dog Regulator- used to adjust the heightof the feed dog21.Shuttle- holds the bobbin and bobbin case


What is roll of science in entertainment?

Type in fruit winder challenge on youtube, miles better than cinnamon challenge! no do not

Related Questions

What does the bobin winder stop do?

The bobbin winder stop is a feature on some sewing machines that automatically stops winding the bobbin once it is full. This prevents the bobbin from overfilling and ensures that it is properly wound for use in your sewing projects.


What is the function of the needle bobbin winder on a sewing machine?

The winder allows the machine to transfer thread from a spool onto the bobbin, which provides the underside, connecting, stitches. It does a better and more even job of it that winding the thread by hand.


What sewing machine has the easiest to fill bobin?

SideWinder Portable Bobbin Winder is one of the easiest to fill bobbin.


Why doesn't my bobbin winder spin on my brothers sewing machine?

Mine doesn't either! did you figure it out?


What is the automatic bobbin winder?

Automatic declutch bobbin winder – which means the machine automatically stops the needle from going up and down when you are winding thread onto the bobbin. ... Needle up/down button – this button allows you to start and stop with the needle in the down position if it is highlighted.


What is a sewing bobbin?

A sewing bobbin is a small spool of thread that goes underneath the needle and sewing platform. It provides the lower thread for the sewing machine. Different models of machines use different bobbins, but most machines require you to create the bobbin yourself.If you'd like to see a picture of a typical sewing machine bobbin, visit the "related link" below.If you look at a diagram of the way a sewing machine works, you can see that when the needle goes down to the bobbin, the bobbin thread is pushed around the upper thread, and that is how the two pieces of fabric are joined together.The upper thread goes along the top of the seam, and the bobbin thread goes along the bottom of the seam.


What is the purpose of a bobbin in a sewing machine?

A bobbin winder is the part of a sewing machine that takes the thread from a spool of thread and winds it on the bobbin. The sewing machine bobbin is a mini-spool of thread, made of plastic or metal, that holds the thread that will be on the underneath portion of your fabric when you sew. The top thread comes from the spool of thread and the thread on the bottom side of your fabric comes from the bobbin. Instead of winding the thread on the bobbin by hand, long and tedious, the machine will wind it for you if you load it up correctly. Check your owner's manual for instructions. If you don't have a manual, do a google search for it by entering the name of your machine branch and the model # and it will probably find one. Also, any experienced sewer can show you how.


How do you load a front loading bobbin?

I'm assuming you're talking about winding a bobbin on a sewing machine? If so, there is a post similar to the one for thread (near it) that you put the empty bobbin on. Then you put your spool of thread where it goes on the machine. You wind your thread from the spool of thread to the bobbin (there's usually a little chart on your machine, but if not, the thread goes through a hook or two and then you wind it about 4 times around the bobbin (clockwise). In newer machines you then push the bobbin toward a holder type thing that is near it. This disengages the needle from going up and down and lets the machine wind the thread as you push the pedal. On older machines, you have to turn the handle of the machine toward you and it disengages the needle, allowing the bobbin to be filled when you press the pedal. Hope this helps! You could probably google your sewing machine name and how to thread a bobbin and maybe get a diagram.


What did a cop winder do?

A cop = a bobbin. A cop winder wound thread (esp. cotton) onto bobbins, for use in a weaving mill.


How to Thread a Sewing Machine?

How to Thread a Sewing Machine Always study the instruction manual that comes with your machine before attempting to thread it. However, most sewing machines operate the same way. Once you master treading your machine, you will easily be able to work on others. Step 1: Handwheels on a sewing machine are designed to allow the user to slowly raise and lower the take up lever. So, with the handwheel, raise the take- up lever. Some older machines have two handwheels, an inner wheel and an outer wheel. On these machines, you must hold the outer wheel while turning the inner wheel. Step 2: Place the thread on the spool pin. Step 3: Lining up the tread with the guides, pull the thread through and secure it. Step 4: Manipulate the thread through the take-up leaver and pull through any additional guides on the machine. Step 5: To thread the bobbin, which provides the machine the ability to create an outside stitch, disengage the wheel, and place the bobbin on the bobbin winder. Step 6: Open the slide plate of your machine, place the bobbin in the bobbin case .Raise, and lower the needle until it catches the thread from the bobbin. If you do not properly thread your sewing machine, you will not be able to use it. Study your owner's manual to learn how the different parts of your machine work.


How do you wind an automatic winder watch?

its automatic..............when you move it winds its self


Can you keep an automatic watch and a quartz watch in one box?

Yes! Of course I can! You may never imagine I can do this. But this is true. I just use a watch winder! I put my automatic watch in the winder and the watch winder has a bottom drawer. It can hold watches, cufflinks and rings etc.