0
Who uses a screwdriver and insulating tape that starts with the letter e?
Wiki User
∙ 8y ago
An electrician uses a screwdriver and insulating tape.
Wiki User
∙ 8y ago
Add your answer:
Earn +20 pts
Why can't you use masking tape to tape electrical wires?
Masking tape isn't designed to be either insulating or watertight, so it's a really bad choice to use to tape electrical wiring together. What masking tape is designed for is paint masking then easy removal after the paint dries without leaving any residue. If you just temporarily want to tape the wires to a wall or something, it's fine, but using it on exposed wiring is a bad idea, and masking tape isn't designed for longtime service anyway. Masking tape is considered disposable, electrical tape is considered permanent. <<>> Electrical tape has an inherent insulation property. It comes in many thickness and temperature ratings. There are two main types in use in the electrical trade. The PVC tape is the everyday tape used for general insulating purposes. The second type is a rubber amalgamating tape. This type is used on large motor splices. Once the rubber tape is applied, it amalgamates into one mass of rubber to provide the proper insulation value. After the rubber tape is applied an over wrap of PVC tape is applied to provide wear protection to the splice.
A type of tape often used when painting?
Painters tape
Can you put tape on a car without hurting the paint?
Yes , but what kind of tape
Which is the difference between blue and white painters tape?
Blue painters tape has A special glue that lets it release more easilly than regular masking tape even though it has plenty of grip for painting, it also does not bleed very bad, it also keeps A sharper edge.
What is theMeaning and the use of push pull tape rule?
push-pull tape rule
Who uses a screwdriver and insulating tape?
It is a ELECTRICIAN
What kind of person uses a screwdriver and insulating tape starting with e?
it is probably electroocupied
What occupation involves using a screwdriver and insulating tape?
The obvious answer is any occupation using electricity, such as electronics technician, electrician, computer repair man, quality control technician. However, anybody who wants to tape up the instructions to a job can use insulating tape to hold up the paper, because the adhesive doesn't damage the paper when you remove the tape.
What are polypropylene tapes used for?
One use is as insulating tape. Another is as jointing tape in plumbing.
Who uses a srewdriver and insulating tape?
Simple, an ELECTRICIAN(without the capitals...)
Why is tape a good insulator?
Duct Tape is made of rubber and since rubber is a good insulator that makes duct tape a good insulator. The best tape for insulating is electrical tape.
Why is duct tape a good insulator?
Duct tape is made of rubber and since rubber is a good insulator that makes duct tape a good insulator. The best tape for insulating is electrical tape.
Is there a kiting tool that starts with T?
Tape is used in kite making. It begins with the letter T.
Who usually uses a screwdriver and insulation tape?
electrician
Who uses a screwdriver and a insuling tape starting with e?
Electrician.
What are some must-have DIY tools?
Depending on the project, there are essential items for your DIY "toolbox" that you should always have on hand. A good DIY tool kit starts with a hammer, flathead screwdriver, Philips screwdriver, tape measure and crescent wrench. These tools can be used to fix - or start! - a variety of household tasks.
What tape should be used to repair electronics?
Typically electricians use a type of tape known as electricians tape. This can be bought at any hardware store or dollar store, and is designed to insulate and shield electrical wires properly.
