0
because many different surfaces have different porous surfaces that will accept cover coatings in a different manner. Example-- wood has a very porous surface...if you shelac, let dry and then sand with a regular piece of writing paper the shelac coating will turn into an extreme smoothe coating making it easier for the next coat to go on much smoother than the one before that.
What else can I help you with?
What are road finishes?
Road finishes refer to the final surface treatments applied to roads, which can include various materials and techniques to enhance durability, skid resistance, and aesthetics. Common types of road finishes include asphalt, concrete, gravel, and chip seal, each chosen based on factors like traffic volume, climate, and budget. These finishes help protect the underlying structure, improve vehicle traction, and provide a smooth driving experience. Additionally, road finishes can impact maintenance needs and the lifespan of the roadway.
Why are finishes applied to wood?
To preserve a nice natural wood look and prevent it drying out.
When was Leonardo da Vinci first painting paint?
The Adoration of Christ, but he never finishes the piece.
Where to buy durakryl 102 wood finish?
http://www.mapleblock.com/detail/butcher-block-finishes-39/
How do you stain wenge wood so its not blotchy?
This site is excellent in explaining various problems with oily woods (like Wenge) and how to solve them, here is an excerpt and the site:The oils create two main problems. # When oil based finishes like varnish, polyurethane, Danish oil finishes, and others are applied over the wood, the finish sometimes takes a very long time to dry. All of these type of oil based finishes dry by absorbing oxygen. The natural oils and resins contained in exotic woods will slow down the drying time by retarding the absorption of oxygen into the finish. Sometimes, if you happen to get stuck with a very oil piece of wood, the finish may stay tacky for weeks.# Adhesion. While other finishes like nitrocellulose lacquers, pre-catalyzed lacquers and water based finishes dry better over oily woods, the oils may prevent these finishes from adhering properly to the raw wood.Below, I have included a few different types of finishes and finishing techniques that I have had success with, but first, before applying any finish, you must perform the following steps to remove any oils that may be on the surface of the wood. * http://www.woodworking.com/wwtimes_oilywoods.cfm
Can you apply linseed oil over polyurethane?
No, it is not recommended to apply linseed oil over polyurethane as they are not compatible finishes.
What type of hardwood floor finishes are available?
Polyurethane Finishes, Hardwax Oil Finishes, Penetrating Oil Finishes, Acid-Cured Finishes, Aluminum Oxide Finishes, Wax Finishes, UV-Cured Finishes
What are the best protective wood finishes to use for outdoor furniture?
The best protective wood finishes for outdoor furniture are typically oil-based finishes like spar varnish or marine-grade polyurethane. These finishes provide excellent protection against moisture, UV rays, and other outdoor elements, helping to prolong the life of the wood. It is important to apply multiple coats and reapply as needed to maintain the finish and protect the wood.
What is furniture stainer?
Furniture Stainer / Painter A person experienced in fine wood working finishes that is knowledgeable of all shop tools. He/She is needed to apply high end stains and finishes and needs experience in sanding, prep, prime, paint and clear coats.
Can you apply an oil stain over a water-based finish?
No, you cannot apply an oil stain over a water-based finish because the two types of finishes are not compatible and may not adhere properly to each other.
Can you apply water-based polyurethane over varnish?
No, it is not recommended to apply water-based polyurethane over varnish as they are not compatible finishes. It is best to remove the varnish before applying the water-based polyurethane for a successful finish.
What special finishes are applied to linen?
what special finishes is applied to linen
What are the differences between matte and glossy finishes on Shutterfly products?
Matte finishes have a flat, non-reflective surface, while glossy finishes have a shiny, reflective surface. Matte finishes are more subtle and can reduce glare, while glossy finishes enhance colors and details.
What are the differences between glossy and metallic finishes in terms of appearance and durability?
Glossy finishes have a shiny, reflective surface, while metallic finishes have a more textured, metallic sheen. In terms of durability, glossy finishes are more prone to scratches and fingerprints, while metallic finishes are generally more resistant to wear and tear.
What are the differences between an oil finish and a wax finish for wood furniture?
An oil finish penetrates the wood to enhance its natural color and grain, while a wax finish sits on the surface to provide a protective layer and a soft sheen. Oil finishes are more durable and water-resistant, while wax finishes are easier to apply and maintain.
What are the differences between matte and metallic finishes in terms of appearance and durability?
Matte finishes have a flat, non-shiny appearance, while metallic finishes have a shiny, reflective appearance. Matte finishes are typically more durable and resistant to scratches and fingerprints, while metallic finishes may show wear and scratches more easily.
What are the application instructions for General Finishes Gel Topcoat Wipe On Urethane?
To apply General Finishes Gel Topcoat Wipe On Urethane, first ensure the surface is clean and dry. Use a lint-free cloth to apply a thin, even coat in the direction of the wood grain. Allow it to dry for 12 hours before applying additional coats if desired. Sand lightly between coats for a smooth finish. Repeat the process until the desired level of protection is achieved.
