0
It would waste electricity if the light were on all the time. It only needs to be on when the door is open.
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
How do I turn on three light bulbs in sequence using one switch?
To do something like that you would first have to have each light on it's own smart switch. Then you would need a master switch that would control each of the other smart switches. You can find switches like this at www.smarthome.com
Replacing reverse light bulbs on passat?
Bit of a nightmare,you need to take the whole light off by taking 3 nuts offfrom the inside.
What are the benefits of leasing a furnished apartment?
The benefits are that all your required living materials will already be there. You won't need to go out and fridges, microwaves, washers and driers or any of that.
Do you need special light bulbs for dimmer switches?
If you are using what most of us think of as a normal light bulb, what is called an incandescent bulb, you do not need special bulbs. Any fluorescent light bulb, including the new curly bulbs called CFLs, requires a special ballast. The ballasts are built into the CFLs so you would need to buy bulbs specially labeled for dimmers. Never place a dimmer on a fan, or any motor, unless it is specifically labeled for use with a dimmer.
To light up a light bulb we need to connect to a?
To light a light bulb you need to connect to a source of electricity like a battery or an electrical outlet.
Is there two stop light switches for the 2005 Nissan Sentra?
I need to know if there are two stop light switches for rear lights on my Nissan sentra 2005.
What type switches and how many of each would be need to control a light from 4 places?
You will need two 3/way switches and two 4/way (Intermediate) switches. Click the link to see a video of exactly how to wire such a circuit.
What is the function of four way switch?
The use of a four way switch is needed when a load (such as a light) needs to be controlled from 3 locations or more. For instance when you walk down a hallway and there is a light there are probably at least two switches one at the beginning of the hallway and one at the end. These two switches will turn the light on or off from either location. These two switches will be three way switches. When the need to control a light or a load from more that two locations arises a four way switch is introduced. A light or load can be controlled an unlimited amount of locations by adding four way switches which are wired in between the two three way switches. Think of a sandwich where the three way switches are the bread and the meat and veggies are the four way switches. You can put as much meat and veggies as you want, but you always need two slices of bread on the top and bottom.
How do you fix a ceiling fan cord if light came out of the controls?
You'll need to replace the small pull-switch inside the light housing. You can buy them at most "home improvement" stores. Beware though: there are LOTS of wires inside the housing. Also: TURN OFF THE POWER TO THE FAN!!!! Take The Caps Off The Bottom Of The Ceiling Fans. Remove The Broken Switches. Buy New Ones. Replace The Switches. Replace The Caps. If It Proceeds, Its The Fans. Remove The Fans Themselves. Replace Them.
How can you control light from three places in a hall?
In UK parlance, you need to use a pair of two-way switches and an intermediate switch.In North-American parlance, you need to use a pair of three-way switches and a four-way switch.
What is the advantages of using switches?
you need switches to help you see. no switches can not help you see.
My 1994 acura integra door ajar light won't go off?
There are door switches that cause the light to go off. Shut all doors and press gently on each door to see if the light goes out. If not then the door switches will need to be removed one at a time to find the bad one.
How do you hook up two light switches on one single home run?
I can probably answer this question but to do so I need more info; switchleg from where another light? And why are you switching it again? or are you adding a light? Respond to my message page and I'll try to answer it further. I am hooking up a light fixture in an add on closet. I am feeding from the light in the bedroom, and I want to control the closet light from a switch just out side the closet door.
Need dome light assy for 97 Camry?
Check this one out http://cgi.ebay.com/ebaymotors/Toyota-Camry-Dome-Light-Sunroof-Switch-Switches-97-01_W0QQcmdZViewItemQQhashZitem3ca6559996QQitemZ260488665494QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
Why electricity swiches are made up of plastic and not metal?
Such switches need to have at least some parts that are non-conducting.
How do I turn on three light bulbs in sequence using one switch?
To do something like that you would first have to have each light on it's own smart switch. Then you would need a master switch that would control each of the other smart switches. You can find switches like this at www.smarthome.com
Need plate to hang inside wall light?
Plate or bracket
