0
too much weight from too many keys cause the cylinder to wear out. try attaching key to breakaway keychain to reduce weight.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Ignition was tampered with a screwdriver key will not enter the ignition need a part 2001 Chevy S10 pickup?
I'd call a locksmith. The ignition wil probably have to be drilled and replaced.
Why is the Security light on in a 2001 Chevy Blazer that doesn't even have a security system?
The 2001 Chevy Blazer does have an ignition security system that is controlled by the computer in the vehicle. The light might come on because of an error that is coming up in the computer due to a key problem or an ignition problem. This is a common issue with the 2000 and 2001 Blazer.
Where is the Crank Sensor in a 2001 Malibu?
The crank sensor on a 2001 Malibu is located on the bottom of the engine near the crank shaft. It monitors the rotation and speed of the crank shaft.
Ford Ranger 2001 4-cylinder sometimes won't start battery alternator wires wires to battery and starter are good?
Will it even crank? If it won't, you have an ignition switch or lock cylinder going bad. If it does crank, just not running, then check to make sure fuel pressure is good and that the ignition coil is good. When exactly will it not start?
What is the cost to repair a neutral safety switch on a 2001 Chevy Malibu LS?
$100 for a new switch at Napa Auto Parts. Most neutral safety switches are a sealed, non reparable unit. If you are doing this yourself, I would recommend testing the wiring before replacing the unit since it is expensive. According to the Napa website, the safety switch on the 2001 Chevy Malibu does more tha simply close when in neutral, so I cannot give specifics. I recommend checking your local library to see if they have a copy of the shop manual. It will have detailed troubleshooting flowcharts to track down the exact problem.
What is the firing order for a 2001 Chevy Malibu 6 cylinder?
123456
How many ignition coils on a 2001 Chevy blazer?
There is 1 per cylinder.
Removing the ignition switch on a 2001 Chevy Malibu?
how do u disconnect the cable from the back how do you remove the ignition switch from a 2001 Chevy Malibu you have to put the old key in the ignition. then if you feel around on the bottom of the assembly you will find a small almost rectangular button. depress this and then proceed to turn the ignition clockwise. this will move it to the right position and if everything works correctly it will just slide out.
Is cylinder 1 on a 2001 Chevy Malibu on the front side or back side?
if its a 3.1 it is back of engine under alternater!!
Where is the shift interlock solenoid located on a 2001 Chevy Malibu?
where is the shift interlock selenoid located on a 2001 chevy malibu
Show me a picture of the gauges of a 2001 Chevy Malibu and what they are?
i just wanted a picture of the gauges because i have problems with my 2001 Chevy Malibu
How do you program a new switch in Chevy Malibu 2001?
1998 chevy malibu programe new switch
Fix rear brakes on a 2001 Chevy Malibu?
what type of rear brakes does a chevy malibu require
How do you set timing on an 2001 Chevy Malibu 3.1L V6?
how do you set timing on 2001 malibu 3.1
What does Gm have as an equivalent to a Malibu?
2001 chevy malibu alarm won't start
Where is the thermostat located on a 1999 Chevy Malibu LS?
Give me a diagram of the location of the thermostat on a 2001 Chevy Malibu
How do you remove the 3 spark plug that's stripped-broken on your 2001 Chevy Malibu It is very hard to get to it because there's not much room between the firewall and cylinder?
You will have to take the 2001 Chevy Malibu to a mechanic to have stripped and broken plugs removed. It needs a special tool to get the broken ones out.
