answersLogoWhite

0

Looking at user comments, it seems that the brand of paint you choose will make a difference as to how many coats of paint you will need to get the results (depth or evenness of color). The accent paint will be the lighter color of the two. Evermore or Valspar were recommended.

User Avatar

Wiki User

12y ago

What else can I help you with?

Continue Learning about Art & Architecture

Does paint thinner ruin paint jobs?

There are many reasons you would need to use paint thinner while on the job. The main reason that you would use paint thinner on the job is if you were going to repaint something and needed to remove the old paint first.


Is lacquer paint better than acrylic paint?

They both serve their own purposes so it depends on what your doing. Acrylic paint is more for typical painting, while lacquer paint is more for stuff that you want to have a hard, durable finish. So it depends on what you're using it for.


How do you touch up ceiling paint?

It helps to have the same paint that was used to paint the ceiling in the first place. Next best option is knowing the exact color and product the paint was in. Next to impossible is buying a can of "ceiling paint" and using that. There are way to many different shades and sheens of ceiling paint to guess. Thin out the paint approx one ounce of water or thinner, depending on the paint base, to eight ounces of paint. Brush or roll the area that is being touched up, then feather out the edges of the paint so that it blends into the existing paint. Feather out means to spread the paint along the edge of the touch up area into the surrounding area so that the touch up doesn't have a hard edge.


What is the difference from base paint and semi gloss latex paint?

Base paint is also known as flat paint, or flat wall paint, or matt paint and is a latex paint. Flat paint is just that, flat or dull with no sheen at all. Semi-gloss is an enamel that dries very hard and can be found in a low sheen (satin) a medium sheen (semi-gloss) and a high sheen (high gloss) Flat paint is usually used on walls and ceilings where as semi-gloss is used in kitchens, bathrooms, doors an jambs because it helps hold back the inherent moisture in those areas.


Do you have to sand and prime latex paint to paint over with water base paint?

I use a product called TSP. I wash the walls really good and then If any chips or dents I sand down that area, If they are a dark color you might want to seal it with a sealer so you don't have to use as much paint to hide the color, but for the most part you do not have to prime of they are in good shape

Related Questions

When was Hard in da Paint created?

Hard in da Paint was created in 2008.


Do non Irish people find it hard to do Irish accent?

No, i can do a irsh accent and im not Irish


Does paint thinner ruin paint jobs?

There are many reasons you would need to use paint thinner while on the job. The main reason that you would use paint thinner on the job is if you were going to repaint something and needed to remove the old paint first.


Is it hard to paint a truck?

no, not hard to paint but hard to paint and make it look like a factory paint job. You need the proper equipment, skill, and knowledge to do it right. Preparation is also very important.


How do you do level 11 factory balls 3?

yellow paint,hard hat,black paint,take off hard hat,belt,pink paint ,hard hat and belt,blue paint,take off hard hat and belt.


How do you beat factory balls 3 level 11?

yellow paint,hard hat,black paint,take off hard hat,belt,pink paint ,hard hat and belt,blue paint,take off hard hat and belt.


What are the benefits of using a corner paint roller for painting hard-to-reach corners?

Using a corner paint roller for painting hard-to-reach corners can make the job easier and more efficient. It allows for better coverage in tight spaces, reduces the need for additional tools like brushes, and can result in a smoother finish.


Is lacquer paint better than acrylic paint?

They both serve their own purposes so it depends on what your doing. Acrylic paint is more for typical painting, while lacquer paint is more for stuff that you want to have a hard, durable finish. So it depends on what you're using it for.


How do you touch up ceiling paint?

It helps to have the same paint that was used to paint the ceiling in the first place. Next best option is knowing the exact color and product the paint was in. Next to impossible is buying a can of "ceiling paint" and using that. There are way to many different shades and sheens of ceiling paint to guess. Thin out the paint approx one ounce of water or thinner, depending on the paint base, to eight ounces of paint. Brush or roll the area that is being touched up, then feather out the edges of the paint so that it blends into the existing paint. Feather out means to spread the paint along the edge of the touch up area into the surrounding area so that the touch up doesn't have a hard edge.


What is the difference from base paint and semi gloss latex paint?

Base paint is also known as flat paint, or flat wall paint, or matt paint and is a latex paint. Flat paint is just that, flat or dull with no sheen at all. Semi-gloss is an enamel that dries very hard and can be found in a low sheen (satin) a medium sheen (semi-gloss) and a high sheen (high gloss) Flat paint is usually used on walls and ceilings where as semi-gloss is used in kitchens, bathrooms, doors an jambs because it helps hold back the inherent moisture in those areas.


Do you have to sand and prime latex paint to paint over with water base paint?

I use a product called TSP. I wash the walls really good and then If any chips or dents I sand down that area, If they are a dark color you might want to seal it with a sealer so you don't have to use as much paint to hide the color, but for the most part you do not have to prime of they are in good shape


What are the common causes and solutions for alligatoring paint on a surface?

Alligatoring paint on a surface is commonly caused by applying a new coat of paint over an old, hard, glossy finish, or by using incompatible paint layers. To solve this issue, you should properly prepare the surface by sanding and priming it before applying a new coat of paint.