answersLogoWhite

0

A angle grinder with a metal cut-off wheel can easily cut off a metal hinge. Use eye protection and be prepared for sparks.

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

How can I safely and effectively cut concrete using an angle grinder?

To safely and effectively cut concrete using an angle grinder, make sure to wear protective gear such as goggles, gloves, and a mask. Use a diamond blade specifically designed for cutting concrete. Mark the cutting line on the concrete and slowly and steadily guide the angle grinder along the line, applying even pressure. Keep the grinder at a slight angle to prevent kickback. After cutting, let the grinder come to a complete stop before setting it down.


What is the best technique to use an angle grinder to cut wood effectively?

The best technique to use an angle grinder to cut wood effectively is to use a wood-cutting blade specifically designed for the grinder. Make sure to secure the wood firmly in place before cutting, wear appropriate safety gear such as goggles and gloves, and move the grinder smoothly and steadily through the wood to create a clean and precise cut.


Can you cut stone with Milwaukee angle grinder ag16 125xe?

yes but you will need a blade for stone :)


How can I safely and effectively cut brick with an angle grinder?

To safely and effectively cut brick with an angle grinder, follow these steps: Wear safety gear such as goggles, gloves, and a dust mask. Mark the cutting line on the brick using a pencil or chalk. Secure the brick in place using clamps or a vice. Adjust the angle grinder to the appropriate speed and attach a diamond blade. Turn on the angle grinder and slowly guide it along the cutting line, applying even pressure. Avoid cutting too quickly to prevent overheating the blade. Once the cut is complete, turn off the angle grinder and allow the blade to come to a complete stop before removing it from the brick.


How can an angle grinder be used to cut wood effectively?

An angle grinder can be used to cut wood effectively by attaching a wood-cutting blade to the grinder, ensuring the wood is securely clamped down, and using the grinder to make precise cuts along the wood grain. It is important to wear safety gear, such as goggles and gloves, and to practice proper technique to achieve clean and accurate cuts.


How to repair 2003 Chevy silverado broken jump seat console?

Here's the better-than-factory $15 fix. Tools and supplies you'll need to fix the console hinge: dremel tool or angle grinder, drill, rivet gun, rivets, piano hinge. Take the dremel cutoff wheel (or grinder) and cut out the broken plastic ramp-shaped hinges on the bottom part of the console. Get a small piano hinge ($9 at Lowe's) and cut to length, about 9 inches. Line everything up and drill holes into the console and the lid, where the old hinge used to be Rivet everything together and it will look sharp and be stronger than new!


How can I cut out door hinges without using a router?

To cut out door hinges without using a router, you can use a chisel and hammer to carefully carve out the hinge recess on the door and frame. Mark the outline of the hinge on the wood, then make small cuts along the outline with the chisel and gradually deepen the cut until the hinge fits snugly. Be patient and work slowly to ensure a precise fit.


How do you remove rusted bolts?

If they are beyond repair, I cut them off with a thin metal cutting disc in an angle grinder.


How do you replace door hinge pin and bushing on Crown Victoria?

The pin will probably have to have the bottom end that is flared out cut off or drilled out. The pin can then be tapped out. This is easier if the hinge has been removed but then the door will have to be blocked up into place while the hinge is off.


What are the differences between a grinder and an angle grinder, and how do they impact their respective functions and applications?

A grinder is a tool used for shaping and sharpening materials, while an angle grinder is a more powerful tool that can cut, grind, and polish various materials. The main difference is that an angle grinder has a rotating disc that is perpendicular to the body of the tool, allowing for more versatile and aggressive cutting and grinding. This makes angle grinders more suitable for heavy-duty tasks and larger projects, while regular grinders are better for precision work and smaller tasks.


What is the best type of saw blade for an angle grinder?

The best type of saw blade for an angle grinder is a diamond blade. Diamond blades are durable and can cut through tough materials like concrete, tile, and metal with precision and efficiency.


Can you cut cast iron?

I cut it with an abrasive fibre cutting disc on my angle grinder. I also cut all pipes this way, very fast and a clean cut.