Not the best idea. Hardwood floor should be angle nailed down, but obviously you cant do that. I think hardwood flooring would dry out and separate in places if glued.
I have done this and I always have the hardwood installed first. Then I install the ceramic tile. To protect the hardwood floor from getting grout or glue on it I cover the hardwood floor with a soft cover (to prevent scratches) and tape it down. Then place a plastic cover over the hardwood. Then I can install the ceramic tile at the edge of the hardwood creating hardly or no seem and level with the hardwood. When its done it looks beautiful.I would install the tile first , that way you don't risk getting glue or grout on your hardwood.
Yes, it must be a glue down wood or a floating wood floor.
Definitely not, it should be angle nailed.
To properly install a glue down hardwood floor, first ensure the subfloor is clean and level. Apply adhesive to the subfloor and lay the hardwood planks in a staggered pattern. Use a tapping block and mallet to secure the planks together. Allow the adhesive to dry completely before walking on the floor.
You can glue the tile down, only concern is there enough room for the door to clear the tile?
The best installation methods for hardwood over concrete floors are glue-down and floating floor installations. Glue-down involves adhering the hardwood directly to the concrete using a strong adhesive, while floating floor installation involves placing the hardwood over a foam underlayment without attaching it to the concrete. Both methods are effective for ensuring a stable and durable hardwood floor on concrete surfaces.
Nail it.
yes
Yes you can. A number of flooring gluesare suitable for this.
Scrape as much as you can with a metal spatula then use Goof Off to get the rest. It will NOT harm hardwood floors.
Rub it with Goof Off and it will soften enough to be removed.
Yes, you do. Which glue depends on the substrate.