0
Yes, it will give you a finish between the two. Just remember it you need to touch up a spot down the road, you are going to have a hard time, unless you make the exact mixture again, that's why it is better not to try mixing different paints together.
Its hard enough getting the color to match even when you have a paint code to follow.
What else can I help you with?
Can you mix white satin latex paint with yellow semi gloss yellow paint?
Sure you can!it will work just fine
How much semigloss and flat paint equal satin paint or eggshell paint?
If you mix a flat and semi-gloss 1:1 you should end up with a paint in the eggshell range. Mix the same paints 1:3 and you should end up with a satin. Experiment with small amounts to get the desired gloss.
Can you mix satin paint and semi gloss paint and if you do will it give a dusty finish?
you can mix paint of different sheen levels provided they are of the same vehicle or base (i.e.. water based, oil based. Mixing a satin with a semi-gloss will still be reasonably close to an "eggshell" finish. The best way to know is to use the chart below and add the 2 sheen level percentages together and divide by 2.For example a low sheen (satin) is 20% sheen + Semi-Gloss which is lets say 50%20+50=70 divided by 2 = average sheen of 35% giving you an eggshell finish.Flat (1-9% gloss)Low Sheen (10-25% gloss)Eggshell (26-40% gloss)Semi Gloss (41-69% gloss)Gloss (70-89% gloss)
Can you mix interior semi gloss paint with interior egg shell paint?
No and yes it depends
Can you mix semi gloss and gloss polyurathane?
Yes, you can
Can you mix satin and flat exterior latex paint?
Yes, you can mix satin and flat exterior latex paint, but it's important to note that the finish may not be consistent. Mixing different sheens can affect the final appearance, potentially resulting in a semi-gloss or uneven texture. It's advisable to test the mixture on a small area first to ensure you achieve the desired look. Always stir thoroughly to achieve a uniform blend.
Is there an additive to make flat paint egshell?
If you want to call an equal amount of semi-gloss and additive then yes. Paint starts out as a gloss and is made flat by adding cheaper pigments and flatteners to the mix so that the paint doesn't have as high as a sheen. There's nothing that will remove or offset those flatteners other than adding higher gloss paint to the existing paint.
How do you make a semi gloss paint shinier?
Add Flat Paint to the Semi Gloss (SG). As a general rule, using commercial "production" grade paint. If you want "Satin" and have SG. you could add 1/3 of a Gal flat, tinted to the same color. If you want SG and have full Gloss Paint, Add 1/3 of a Gal Flat, tinted the same color. The reverse is N O T true. If you want full gloss and have Flat, it won't work in my experience. Experiment on your own. Just remember its easier to tone down gloss than to add it. This is assuming the paint is still liquid. If it is already on the walls, and you want to avoid repainting. A "Matte" finish Clear Coat could be sprayed over the whole wall, But to do it "right" you would want to repaint
Can you mix satin finish paint with eggshell finish paint?
More important is, that both paints are of the same kind (like: oil-based paint, acrylic paint, latex paint). Semi-gloss is more easily painted over then high gloss, but first better find out what the old paint layer is made of. Check with the help of alcohol - if paint comes off in any way when you rub it with a cloth of alcohol, it's latex or acrylic paint (and can be painted over with acrylics).
Can you mix gloss paint with fibreglass resin?
No, it will weaken the resin.
Can you mix a semi-gloss paint with a satin of the same color?
You sure can, as long as both products are latex based or both are oil based, etc... The mixed result will also have a different sheen than both of the originals, so make sure that you have enough left over for touch ups later.
Does sherwin Williams have a product for making satin paint flat?
If you want to turn your satin paint into flat wall paint simply mix one to one. One gallon of flat to each gallon of satin. The flat wall paint will obliterate any sheen the satin once had.
