No, the gypsum based compuond will not have proper adherance and will crack and flake off.
To repair a damaged knock down ceiling, you will need to scrape off the damaged texture, apply a new layer of joint compound, re-texture the area to match the existing knock down pattern, and then paint over the repaired area to blend it in with the rest of the ceiling.
To achieve a knock down texture on your walls, you can apply a thinned layer of joint compound with a trowel or roller, then use a knockdown knife to flatten and create the desired texture before it dries.
To effectively repair a damaged knock down ceiling texture, you will need to scrape off the damaged area, apply a new layer of joint compound, and then reapply the knock down texture using a texture sprayer or a trowel. Sand the area smooth once the texture is dry, and then paint to match the rest of the ceiling.
Knock Me Down was created on 1989-08-22.
Knock You Down was created on 2009-04-07.
To achieve a knock down texture on walls using a knock down texture tool, the best technique is to first apply a thick layer of joint compound or texture mix to the wall using a roller or trowel. Then, use the knock down texture tool to gently press and drag across the wet texture to create a flattened, textured finish. Make sure to work in small sections and practice on a test surface before applying to the entire wall for best results.
To achieve a smooth finish on a wall with a "knock down texture," you can apply a thin layer of joint compound over the textured surface and then use a trowel to flatten and smooth it out. Sand the surface lightly after it dries for a polished look.
They used mortar.
Iraq did not knock down the Twin Towers
In Bowling the term used when knock down all the pins is "Strike".
you can knock it down by using a bat on an hard object that will not brake
Knock Me Down.