Yes
you have to take the bumper off to get to all the bolts
Need to remove bumper
i have dropted the bulb into the headlight and i want to remove the lens to get it out any ideas thanks
you need to remove the bumper to access the 2 10mm bolts of the headlight
You First must remove the bumper that should have only nine clips, then remove the right headlight to get to the reservoir. this seems like a lot and it is, but the reservoir is under the headlight assembly and the only way to remove the headlight is to remove the bumper.
You have to remove from bumper and splash gaurd just to change bulb,thats crazy
you haft to remove the bumper first to get to the bolts holding in the lights
You must remove the front bumper to access the headlight.
No, you do not need to remove the bumper. here is a video on how to change your headlight really easy. http://youtube.com/watch?v=ieXVCTWQHSY I did it just to see how easy it was and it was pretty easy.
You have to remove the front bumper, remove the headlight assembly. then take the fog light bulb out.
First, you'll need to remove the front bumper. To do this, take off the bolts underneath the front part of the bumper. Remove the bumper turn signals to access the two bolts per side that hold the bumper on the car. Support the bumper by putting something underneath it. Then get a stubby Phillips screwdriver and remove the two screws per side at the end of the bumper (in the wheel well). Bumper should come off. Remove the headlight assembly by diconnecting the headlight sockets, remove the 10mm bolts above each headlight assembly. Remove the 10mm bolts below the headlight assembly. Done.
Remove backing plate on headlight unit.