If the fan blower switch in your 1986 Mercedes-Benz 190E isn't working, first check the fuse to ensure it hasn't blown. If the fuse is intact, inspect the switch itself for any signs of damage or corrosion. Additionally, examine the wiring and connections for any loose or broken components. If these components are functioning properly, the issue may lie with the blower motor itself, which may require further testing or replacement.
Open the bonnet, remove the scuttle cover, wiper motor, and finally blower motor.
my 1993 190E 2.3 is doing the same thing. just replace the switches...they tend to not last
The blower motor for a 1993 Mercedes 190E is located under the dashboard on the passenger side of the vehicle. To access it, you typically need to remove the glove compartment and possibly some paneling. The blower motor is mounted to the HVAC housing, making it essential to be cautious during removal and installation to avoid damaging any surrounding components.
It's probably the switch.
It is not impossible but it would be a nightmare working out the electronics, and the transmission is not compatible
Switch may be bad
Its on the door panel next to the door handle. at least that's where it is on my 1992 190e 2.3
To remove and replace the blower fan on a 1991 Mercedes 190E, first disconnect the battery to ensure safety. Then, remove the passenger side dashboard panel and locate the blower motor, typically found under the glove compartment. Unscrew the blower motor's mounting screws, disconnect the wiring harness, and pull out the old fan. Install the new blower fan by reversing the steps, ensuring all connections are secure before reassembling the dashboard and reconnecting the battery.
A Mercedes 190e doesn't have a carburetor. They are fuel injected.
Yes there is. You simply twist the tachometer reset nob counterclockwise to dim.
oil filter on a Mercedes 190E 1986 is in the back of engine
The blower motor fuse for a 1992 Mercedes-Benz 190E is located in the fuse box, which is typically found under the dashboard on the driver's side. Specifically, you should look for fuse number 5 or 6, depending on the vehicle's configuration. Always refer to the owner's manual for the exact fuse layout and specifications before replacing any fuses.