0
Remove whatever is obstructing the drain. -- First, get a bottle of one of the liquid drain openers from any drugstore chain. Follow the directions on the label and see what happens. If the first application doesn't open the drain, do it a second time. If that doesn't do it, then ... -- Assume the obstruction is a solid object stuck in the drain pipe. Look down under the sink for a section of pipe that goes down--up--down. That's the 'trap'; things that fall down the drain are supposed to stay in the trap. There's a big pipe-nut above and below the trap. Loosen both, and drop the trap section out of the pipe. Water and gunk dribble out on you and on the floor. Clean out the trap, re-assemble everything, and see if anything changed. If the drain is still not running, then the clog is farther down, past the trap. There's one more thing you can do if you still want to work on it yourself: -- Borrow or buy a so-called "snake". It's a long, flexible metal thing that can be run down into the drain pipe and rotated, to dig out whatever is stuck way down in the pipe. If you start it at the sink drain, it probably won't be able to make the bends past the trap, so you should open the trap again and feed the snake into the straight pipe below the trap. -- If none of this does the job, it's time to call a plumber.
What else can I help you with?
What is the purpose of the stopper in a sink drain?
The purpose of the stopper in a sink drain is to block the flow of water, allowing the sink to hold water for tasks like washing dishes or shaving.
How can I open the kitchen sink drain?
To open the kitchen sink drain, locate the stopper or plug at the bottom of the sink and remove it by twisting or pulling it out. This will allow water to flow freely down the drain.
Can a basement drain be tied into a sink drain?
Heck no as the sink is higher then the basement drain and water does NOT flow up hill BUT it does seek its own level BUT you can connect a sink drain to a basement drain if you properly trap and vent the line
Why would water from a full sink back up the other side of a dual sink?
The drains of the two are connected, and then feed to a common drain. If the drain line is blocked below the sinks, water cannot flow out the drain, so will flow from a full sink to an empty. Look under the sink, and you will see the drain line arrangement. Get the clog fixed, and it will stop doing that.
How do you speed up a slow drain in kitchen sink?
1- Increase the diameter 2- water jet the lines to scour them back to full flow as designed
How does the toe tap drain function in a bathroom sink?
The toe tap drain in a bathroom sink operates by allowing water to flow out when the tap is pressed with your foot. This mechanism helps to open and close the drain without using your hands, providing a convenient and hygienic way to control the water flow in the sink.
Why does the dishwasher back up into the sink?
The dishwasher may back up into the sink if there is a clog in the drain hose or if the sink's drain is blocked, causing water to flow back into the sink instead of draining properly.
What is the purpose of a drain tailpiece in a plumbing system?
The purpose of a drain tailpiece in a plumbing system is to connect the sink drain to the P-trap, allowing water and waste to flow out of the sink and into the sewer system.
How does a sink work to drain water effectively?
A sink works to drain water effectively by using a drain pipe connected to a trap, which prevents odors from coming back up. When water is poured down the sink, it flows through the drain pipe and into the sewer system, carrying away any debris or waste. The force of gravity helps the water flow smoothly through the pipes and out of the sink, allowing it to drain effectively.
What is the purpose of a sink drain flange and how does it contribute to the functionality of a sink?
The purpose of a sink drain flange is to connect the sink to the drain pipe. It helps to seal the connection and prevent leaks, ensuring that water and waste flow properly down the drain. The flange also provides a stable base for the sink drain assembly, contributing to the overall functionality and efficiency of the sink.
What is the anatomy of a sink?
The anatomy of a sink includes a basin for holding water, a faucet for controlling water flow, a drain for removing water, and pipes for connecting to the plumbing system.
What are the different parts of a sink and how do they work together to facilitate the flow and drainage of water?
A sink typically consists of a basin, faucet, drain, and trap. The basin holds the water, the faucet controls the flow of water into the basin, the drain allows water to exit the basin, and the trap prevents odors and gases from coming back up the drain. These parts work together to allow water to flow into the basin, be used for washing or other purposes, and then drain out efficiently.
