I used to love making crafts from bottle caps with my friends and presenting them to my parents. The way I learned it was very simple.
Things you need:
1 Bottle Cap
Magazine
Scissors
Glitter Glue
Varnish
Magnet
Elmers Glue
Step 1:
Get a nickel and place it over a picture or magazine and trace it with a pen. Cut the image out.
Step 2:
Get some glitter glue and cover the bottom part of the bottle cap until the bottom cannot be seen. Don't put too much!
Step 3:
Place the picture gently onto the glitter and wait for it to dry.
Step 4:
When dry, paint a thin layer of Elmers Glue over the picture to protect it against the varnish in the next step.
Step 5:
Pour varnish over the picture until it reaches the brim of the bottle cap and wait for it to dry. It can take up to 4 days to dry, depending on how much varnish you put on it.
Step 6:
When the varnish dries, take a magnet and glue to the bottom of the bottle cap. Enjoy!
first you find a metal bottle cap then pour flammable nail polish remover in the bottle cap then light it fire
Plastics make up the majority of bottle caps. They might also be created from metal. Based on its intended use and the type of bottle or container, the material used to make bottle caps is selected.
a bottle cap is on the top of a bottle, the size of the bottle is what determines the size of the cap. psypocalipse out.
To put a glass bottle cap back on, simply place it on top of the bottle neck and press down firmly until it clicks into place. Make sure to align the cap with the threads on the bottle neck to ensure a secure fit.
You use a bottle cap to open the bottlecap. Place the bottle cap on your thumb, make a "C" (or a backwards "C") with your hand, and pop open the cap with an upwards motion.
you have to find a bottle cap. then get a small magnet and hot glue it to the bottle cap. next get yourchoker with the magnet tied to it and then put the bottle cap on the other magnet. then inside the bottle cap you can put all different kinds of pics and glue it to a cardboard circle the size of the cap then glue the cardboard inside the cap. You can find bottle caps on eBay for cheap by the bulk. Use the strong magnets and E6000 glue to glue the magnet on the the bottle cap (large tube at Michaels or Hobby Lobby for $5.00). You need a one inch circle whole punch (9.99) and you can print pictures or words in MS Office for the back ground, the size of the circle needs to be about .78 so you can whole punch it. Once it is punched you will want to place the picture inside the bottle cap and use a clear drying paper glue that willnot make the the ink on the paper run...such as Aleene's Paper Glaze (Michaels $4.99). It is a great idea to put rhinestones or embellishments inside on the cap too. Once you have what you want put the paper glue to cover completely and let dry for 24 hours then glue on the magnet with the E6000 glue.
To put a bottle cap into a bottle, simply place the cap on top of the bottle opening and press firmly until it snaps into place. The cap should securely close the bottle to prevent any liquid from spilling out.
from magnets
It depends on whether it is a plastic cap - as in a bottle of soft drink - or a metal cap - as in a beer bottle.
the cost of the bottle + liquid = 18 cents Cost of a Cap is $0.05 US. Cap cost more then filling the 20oz bottle Which gives Coca Cola a pretty good profit.
A bottle cap is an inclined plane. I am not sure exactly why.
what happens if you squeeze a bottle with a balloon