0
Probably will have to replace entire hub assembly Remove wheel Remove brake drum or caliper and rotor if disc brakes Remove brake line Remove 4 bolts that hold hub assembly in place Carefully remove ABS sensor wire harnessif so equipped Hub assembly may have to be separated from backing plate by supporting backing plate and beating the hub out with a hammer Use New hardened bolts for re-assembly Torque to 65 ft. lbs.
What else can I help you with?
How do you replace the wheel bearing on a Toyota Echo?
I had to pressed in by a garage . they did not last . I bought 2 from a junk yard no problems after 110k more miles i
When to replace timing chain on 2003 Toyota Echo?
when it breaks
How do you replace front wheel bearings on a 2001 Toyota Echo?
go to dealer
How much to replace 2003 Toyota Echo trans?
$1500 to $2000
Can i replace my 2003 Toyota Echo antenna?
You can replace your 2003 Toyota Echo antenna. Remove the antenna retaining nut. Remove the cable from the bottom of the antenna. Reverse the process to install the new antenna.
How much is the cost to replace the wheel bearings for both front tires on a 2001 echo?
$80.00 do it your self
How do you change a front wheel bearing on a 2001 Toyota Echo?
you have to remove the disc brake, lower strut bolts, ballpoint and tie rod bolts and Axel nut to remove the complete steering knuckle . the bearing is pressed in and will need to be pressed out this includes the wheel spindle replace in reverse. bearing from Toyota is about 30.00 buy the spring clip also it is Worth it took me about 3 hours plus 30.00 to have pressed out at a local parts place. good luck
How do you replace the brake light on a 2003 Toyota Echo?
To replace your brake light, you need to unscrew the brake cover from the inside of the trunk. Then you will be able to pull the old bulb out and replace it.
When was We Be the Echo created?
We Be the Echo was created in 2003.
When did Alter Echo?
Alter Echo happened in 2003.
How do you replace a Toyota Echo control arm?
To replace a Toyota Echo control arm, first, safely lift and support the vehicle on jack stands. Remove the wheel, then detach the control arm by unbolting it from the chassis and the steering knuckle. Replace it with the new control arm, ensuring all bolts are torqued to manufacturer specifications, and reassemble the wheel. Finally, lower the vehicle and check the alignment if necessary.
How do you replace 2001 Toyota Echo brakes?
To replace the brakes on a 2001 Toyota Echo, start by lifting the car and removing the wheel. Next, remove the caliper by unbolting it and then take out the old brake pads. Install the new brake pads and reattach the caliper, ensuring everything is secure. Finally, replace the wheel, lower the car, and pump the brakes a few times to ensure proper function before driving.
