answersLogoWhite

0

To to adjust the throttle cable, first take off the air cleaner. Hold down the metal adjusting tab that is at the end of the cable.There is a sliding piece at the end of the cable, move it against the end. Let go of the adjusting tab then move the cable to the end.

User Avatar

Wiki User

11y ago

What else can I help you with?

Related Questions

How do you adjust the throttle valve cable on 1989 suburban with 5.7 V8?

To adjust the throttle valve cable on a 1989 Suburban with a 5.7 V8, first, locate the cable where it connects to the throttle body. You can adjust the tension by loosening the adjustment nut or bolt and sliding the cable housing to achieve the desired tension. Ensure that there is slight slack when the throttle is closed, which allows for proper operation. After adjustment, recheck the throttle response to ensure it's functioning smoothly.


What is the TV cable and how do you adjust it on a 1987 Chevy Camaro Z28?

The T V cable is a "Throttle Valve" cable and is located by the throttle body and is part of the throttle and can be adjusted by simply pushing on the adjustment part of the TV....by adjusting the cable it will affect the shift points of your trans.


How do you adjust a 04 ktm 85sx power valve?

To adjust the power valve on a 2004 KTM 85SX, first, ensure the bike is off and cool. Remove the side cover to access the power valve mechanism. Check the alignment of the valve arm; it should be at a right angle to the valve body when the throttle is fully closed. Adjust the cable tension to achieve this position, ensuring there's no slack but also not too tight. Reassemble the cover and test the operation by twisting the throttle to confirm smooth opening and closing of the power valve.


Where is the PCV valve located on a 99 cougar?

pcv valve is located under the throttle cable frame (frame holding the throttle cable) that's bolted to the intake manifold. go to autozone ask for a valve and you will have no problem locating it.


Where is idle control valve located on 1989 topaz?

You can adjust the idle by removing the plastic splash guard right at the throttle cable and just turn the screw to increase or decrease idle.


Car stalls when put in gear?

if its a manual then it could be three things, clutch cable or throttle cable, or IAC (idle air control valve) but if its an automatic it could be throttle cable or IAC.


What is a tv cable on a 93 grand prix?

The TV cable(throttle valve control cable)is your transmission kick down.Or is also incorrectly known as passing gear.It goes from your throttle body to your transmission .


Where is the PCV valve located on a 1990 Chevrolet Cavalier?

Try looking on the head, on the passenger side of the throttle body


Why would your Mazda Millenia seem to be idling really low?

I had the problem clean the egr valve, camshaft position sensor and the mass flow intake sensor use crc cleaner and brake cleaner for the egr valve. After all that i found out i had to adjust my throttle cable and adjust the idle it runs smooth now.


How do you add a throttle cable to a 4.5 Briggs and Stratton carburetor that currently has no manual throttle?

It will have to be somehow attached to the throttle valve. Clamp the cable so that it doesnt moves then attach it to the vavle and it should go back and forth. The more the valve is openend then the more rpms it should have. Good luck.


How is a valve lash adjusted on a 1997 Cavalier?

reburton2@comcast.net You don't. Valve lifters are hydraulic, they automatically adjust for proper clearance.


Where is the idle air control valve located for 2001 Chevrolet cavalier 2.2ohv engine?

Should be right by the throttle body.