0
well i just had to do that this last summer. u pretty much have to take off ur head . wich means you will need to have a new head gasket . but u have to take off ur cam. its only a 3 cylinder and its all easy to get to its just annoying but ur gonna need to take out the valves to replace the seals and make sure there seated corectly ur prolly going to want to replace the exaust valves also as they burn up . most likely u should have no problem with ur intake valves other than normal buildup but they all should be cleaned once cleaned and u make sure there seating smoothly the valve stem seal is what slips on the end of each valve. im pretty tired at the moment and my literacey and spelling is horrid. if this helps it helps but pretty much ur gonna need to buy at least a head gasket and id bet ur exaust valves could use replaceing also. as that can cause alot of blow by ..."smoke from exaust" anyways good luck
What else can I help you with?
Does a 1992 Geo Metro have an interference engine?
yes, if it's a 3 cylinder Mr Geo Metro yes, if it's a 3 cylinder Mr Geo Metro
Is the 3 cylinder Geo metro motor an interference design engine?
No, the 3-cylinder Geo Metro engine is not an interference design engine. This means that in the event of a timing belt failure, the pistons and valves will not collide, preventing potential engine damage. This design characteristic makes the Geo Metro's engine more forgiving in terms of maintenance and timing belt replacement.
How do you adjust the valves on a 1995 1.3 Geo Metro Can't find any adjusters Is it shimmed?
No, 95 - 97 are self-adjusting, hydraulic lifters.
Do you have video on adjusting timing on a 1996 geo metro?
can someone tell me how to adjust timing on a geo metro 1996
How do you adjust Geo Metro convertible roof?
You sell me the car, then you don't have to adjust it.
Can you put a 1999 Geo Metro alternator in a 1996 Geo Metro?
If the engines are the same size then yes (ie) 3 cylinder 1.0L to 3 cylinder 1.0L.
How Adjust Geo Metro AC Valve?
no adjustment possible
Is the 1995 Geo Metro 1.0l 3 cly engine an interference engine?
The 1995 Geo Metro with the 1.0L 3-cylinder engine is classified as a non-interference engine. In non-interference engines, the pistons and valves occupy separate spaces in the cylinder, meaning that if the timing belt were to fail, the pistons would not collide with the open valves. This design reduces the risk of significant engine damage in the event of a timing issue.
What year did the geo prism use a 3 cylinder engine?
The Geo Metro was the only Geo to have a 3cylinder engine.
Are 93 Geo Metros and 92 Geo Metro engines the same?
Yes 1litre 3 cylinder.
Valve adjustment 95 Geo Metro 4 cylinder?
non adjustable
How much oil to fill Geo Metro 3 cylinder?
3.75 qts
