0
What else can I help you with?
How deep should a main water line be from meter to house in Kentucky?
how deep should water line be from meter to house in Versailles Kentucky
How would one get a water meter installed?
To get a water meter installed you generally have to have someone install it for you, and you can either apply to have someone do that for you, or pay a professional to do it.
How can I detect a water meter leak using the water meter leak indicator?
To detect a water meter leak using the water meter leak indicator, you can observe the leak indicator dial on the water meter. If the dial is moving when no water is being used in the house, it indicates a leak in the water system.
What size water pipe should be used from the meter to the house?
The size of the water pipe from the meter to the house should be determined based on the water flow rate needed for the house. It is recommended to consult with a professional plumber to determine the appropriate size of the water pipe for optimal water flow and pressure.
Where is a water regulator located in the water line to your house when it is not by the water main?
you would see it by the meter unless your house has a shutoff in the interior, then it could be there.
How do you know if a pipe is leaking under your house?
With the water turned off on all the water devices in your house, see if your water meter is still running.
Where is the main water line located in a house?
The main water line in a house is typically located underground, running from the water meter near the street into the foundation of the house. It is usually found near the water heater or where the water enters the house.
How many KPa to raise water 1 meter?
To raise water 1 meter, you would need to exert a pressure equivalent to the weight of the water column above. For water, the pressure increase with depth is 9.81 kPa per meter. Therefore, to raise water 1 meter, you would need to apply a pressure of 9.81 kPa.
How is water flow measured into a house?
There is usually a small water meter fitted in-line of the water pipeline. You'll find it near the property boundary, where it can be easily read by a meter reader.
What size gas meter do you need on your house if I am installing a tankless hot water heater?
Standard meter will suffice, need to know pressure from meter to house. Size pipe appropriately for gas pressure coming into house X distance to water heater. Gas company or plumber should be able to help with this calculation.
How can I locate the main water line into my house?
Locating the main water line into your house can typically be done by finding the water meter, which is usually located near the street or sidewalk in front of your house. The main water line will run from the meter into your house. You can also check for a shutoff valve where the main water line enters your house, as this can indicate the location of the main water line. If you are unsure, you may want to contact a professional plumber for assistance.
What is the water bill for a two story house with three bedrooms?
That depends (a) on how many occupants there are, and (b) whether your usage will be by annual fixed bill, or water meter. --------------------------------------------------------------------- With a meter the bill is based on how much water is actually used and the used water that must be removed, not the size of the house.
