"bypass" means to go around...Don't be a theif...
So my suggestion would be to bypass that thought and "go around" the house and shut off things that aren't necessary. Don't be wasteful running hot water down the drain while washing dishes. Be conservative in every situation dress warmer inside the house in colder weather. It's actually better to keep the temp below 65 degrees as bacteria begin to multiply and spread at temps above that, besides doesn't 65 seem like a nice temp when it is 105 outside? So it would seem to me it is a comfortable temp when it is 25 degrees outside makes sense right?
To accurately read your gas meter, locate the meter and record the numbers displayed from left to right. Take note of any numbers in red or after a decimal point. Subtract the previous reading from the current reading to determine your gas usage.
To read your gas meter accurately and efficiently, follow these steps: Locate your gas meter, usually outside your home. Write down the numbers displayed on the meter from left to right. Take the reading at the same time each month for consistency. Subtract the previous month's reading from the current reading to determine your gas usage. Contact your gas provider if you have any questions or concerns about your readings.
Gas engineers can get access to a gas meter bypass kit. Normally from companies like www.gas-engineer-kit.com Let me be frank here though they are for gas engineers and nobody else. If those bypass bars got into the hands of the wrong type of people there would be the possibility of dangerous situations.
To accurately read a natural gas meter, locate the meter and record the numbers shown on the dials or digital display. Read the numbers from left to right, and note any decimal points. Compare the current reading to a previous reading to calculate the amount of gas used.
To accurately read a gas meter, locate the meter, record the numbers displayed from left to right, and note any decimal points. Subtract the previous reading from the current one to determine gas usage.
The gas meter may not be reading the gas card due to the card being damaged or not properly inserted into the meter. Make sure the card is clean and undamaged before inserting it again. If the issue persists, contact the gas company for assistance.
Multiply cubic meters by 1,000 to get liters.
With no other gas appliances in the house operating. Note the reading on your gas meter, then start the water heater and when it shuts off note the meter reading again. The question does not provide enough info for a calculation, such as the amount of water and the amount it is to be heated.
You will have a gas meter to give this reading. If it doesn't give cubic feet directly it should have a conversion factor on the meter. So you just read the meter on the right days.
where do you go on your website to notify you of meter reading
You can get a meter reading by looking at the BIG circle thing that does be outside of the house and it will say 88888 and then say another number which is the meter reading.
Yes if you have the balls