The seat safety switch is there for a very good reason, like say if you fall off the mower it stops and doesn't continue driving to run you over, or simply starting it standing beside it with your foot under the deck.
If the switch is broken and you can't get the mower started though just use a jumper-wire between the contacts so the electrical current is complete, simple really.
Bypass the switch with a jumper & see if you can bump it with a hot wire.
Murray 12hp/38624x12b has a unmarked 6pole ignition switch,i don,t have the orginal switch so i don,t know if this is the right one. 1993 has no info.
The PTO (Power Take-Off) switch on a Murray riding mower is typically located near the operator's seat, often on the dashboard or control panel. It is usually a lever or a button that activates the mower's blades. In some models, it may also be integrated into the ignition switch. Always refer to the specific owner's manual for precise location details for your model.
how do you bypass electric window switch on 88 toyota pickup
You can bypass the AC low pressure switch, on your Toyota Corolla, by removing the switch. You can remove the wiring to the switch and leave the switch and place.
No
Neutral switch
How do u bypass the neutral safety switch in a 2002 chevy silverado 1500
There is no inertia switch on this vehicle.
It doesn't have one, it has a switch on the clutch pedal. It also has an interlock switch on the dash, turn the ignition switch on and press the interlock switch and it will bypass the clutch switch.
To bypass the cars neutral safety switch, you need to find the two wires to the safety switch and connect them together. It can also be done by putting the car in neutral.
It is possible. Bypass the switch and see.