1 horsepower is the power of 1 horse.
205 kw=276hp
sshi
Service factor is gearbox horsepower rating over motor horsepower.
If you know the torque, you can calculate the HP.
what formula is used for calculate flow rate of pump vs kw
To convert pounds-feet per second into horsepower, use the formula: Horsepower = (pounds-feet per second) / 550 This conversion assumes that 1 horsepower is equivalent to 550 pounds-feet per second.
Horsepower (hp) is a unit of measurement of power, or the rate at which work is done, usually in reference to the output of engines or motors. A few equations to help you calculate horsepower: Power = Work / Time Power = (Force x Distance) / Time
Converting cubic centimeters (cc) to horsepower is not a direct conversion as they are units measuring different things. Cubic centimeters measure volume, while horsepower measures power. However, you can calculate the horsepower of an engine if you know its torque and rotational speed using the formula: Horsepower = (Torque x RPM) / 5252. So, without additional information, it is not possible to directly convert 1200 cc to horsepower.
To calculate the minimum horsepower required, first determine the force needed to overcome friction: F_friction = coefficient of friction * Normal force. Then calculate the force required to accelerate the box: F_acceleration = mass of the box * acceleration. Add these forces together to get the total force, and use this with the speed to calculate the power required in watts. Finally, convert the power to horsepower. The minimum horsepower required will be slightly more than this to account for inefficiencies in the system.
To calculate the horsepower needed to move 500 lb, you would also need to know the speed at which the weight is being moved. The formula to calculate horsepower is (Force x Distance) / Time. So without the speed or time parameter, it is impossible to provide an exact answer.
To calculate the horsepower of a vehicle based on its 0-60 time, you can use the formula: Horsepower (Weight of the vehicle (Speed in mph)3) / (Constant Time in seconds). The constant value typically used is 375. This formula takes into account the weight of the vehicle, the speed achieved during the 0-60 time, and the time it takes to reach that speed.
You don't, because horsepower is not a metric unit. Horsepower is a unit of work, so the metric equivalent would be the watt. There are several different definitions of horsepower, which work out to somewhere between about 730-750 watts depending on precisely which one you use.
You will need to have some information ready. It is good to know the horsepower and the torque of your diesel engine.