thank you
Two factors that affect mAs (milliampere-seconds) are the tube current (mA) and exposure time (s). Increasing the tube current or exposure time will increase the mAs value, which in turn affects the amount of radiation delivered to the patient.
mA (millamps) x Time (seconds) = mAsmA Tube CurrentThe second control of the output of the x-ray tube is called the mA (milliamperage) control. This control determines how much current is allowed to flow through the filament which is the cathode side of the tube. If more current (and therefore more heating) is allowed to pass through the filament, more electrons will be available in the "space charge" for acceleration to the target and this will result in a greater flux of photons when the high voltage circuit is energized. The effect of the mA circuit is quite linear. If you want to double the number of "x" photons produced by the tube, you can do that by simply doubling the mA. Changing the number of photons produced will affect the blackness of the film but will not affect the film contrast.S TimeThe third control of the x-ray tube which is used for medical imaging is the exposure timer. This is usually denoted as an "S" (exposure time in seconds) and is combined with the mA control. The combined function is usually referred to as mAs or milliampere seconds so, if you wanted to give an exposure using 10 milliampere seconds you could use a 10 mA current with a 1.0 second exposure or a 20 mA current for a 0.5 second exposure or any combination of the two which would result in the number 10. Both of these factors and their combination affect the film in a linear way. That is, if you want to double film blackness you could just double the mAs.
The duration of Maximum Exposure is 3600.0 seconds.
The duration of Maximum Exposure is 3600.0 seconds.
The duration of Exposure of a Dream is 2700.0 seconds.
mAs stands for milliampere-seconds, a measurement of the quantity of X-ray radiation produced during an exposure. kV stands for kilovolt, a measurement of the voltage applied to the X-ray tube, influencing the energy level of the X-ray beam. Adjusting mAs and kV settings helps control the quality and quantity of X-ray exposure.
The duration of Daffy's Southern Exposure is 420.0 seconds.
MPH = miles per hour. In order to calculate hours from seconds, you just need to know that there are 3,600 seconds in an hour.
The intensity of X-ray radiation used in medical imaging procedures varies depending on the specific procedure and the patient's needs. It is typically measured in milliampere-seconds (mAs) and kilovoltage (kV). The intensity is carefully controlled to minimize radiation exposure while still producing clear images for diagnosis.
The duration of Northern Exposure is 2700.0 seconds.
a few seconds
Multiply by 24x60x60. This is 86400 seconds in a day.