table of ms c channel , angle's weight for per 1 meter for e.g. 100mm x 50mm x 5mm thk ms c channels weight?
The weight of a 1 meter MS angle with dimensions 25x25x5 will depend on the density of the material. Assuming a density of 7850 kg/m^3 for mild steel, the weight can be calculated using the formula: weight = volume * density. Calculate the volume of the MS angle first (25x5x2 representing the length, thickness, and two sides) and then multiply by the density to get the weight in kg.
Formula of hexagonal ms rod
4.5 kg
1.80 kg/mtr
In order for your to know the weight must know the thickness of the angle bar.
specific weight of the sheet * area *thickness = weight of the sheet
65*65*8
To calculate the weight of a 1-meter length of a mild steel (MS) angle with dimensions 25x25x6 mm, you first need to determine the volume. The volume can be calculated using the formula for the cross-sectional area multiplied by the length. The cross-sectional area for an angle iron is calculated as the area of the two legs minus the area of the cutout. For a 1-meter length, the weight can be found by multiplying the volume by the density of mild steel (approximately 7850 kg/m³). The total weight is approximately 1.21 kg for a 1-meter length of 25x25x6 mm MS angle.
weight of ms hollow bar 20mm*20mm
12.7 kg / m
To calculate the weight of an ISA 50x50x6mm angle, you can use the formula: Weight = Area x Length x Density. First, calculate the cross-sectional area of the angle (50x6 = 300 square mm), then convert it to square meters. Multiply the area by the length of the angle in meters and the density of the material (e.g., mild steel density is approximately 7850 kg/m^3) to determine the weight in kilograms.
The dimensions of the steel are required.