0
What else can I help you with?
How do you adjust clutch on 1965 gto?
To adjust the clutch on a 1965 GTO, start by checking the clutch pedal free play. There should be about 1 to 1.5 inches of free play at the top of the pedal. If adjustments are needed, locate the clutch linkage or cable under the dash and either lengthen or shorten it to achieve the proper free play. Make sure to test the clutch engagement after making adjustments to ensure smooth operation.
How do you change the clutch on a Mitsubishi gto?
i have only pulled the engine out the top. made it so easy to work on. im re building and doing the clutch at the same time. i followed this walkthrough http://supercar-engineering.com/rubberducky/3S/RnR/TT/EngRem/index.html
How do you adjust clutch on 1966 Pontiac gto?
There is a rod that runs from the clutch pedal mechanism to the clutch fork. On this rod there should be threads and a couple of nuts to adjust the length of the rod shorter or longer. Adjust as needed.
Can you tell a GTO Judge from a GTO by the vin?
No. The 2 42 tells you - Pontiac, GTO but you will need to get a copy of the build sheet for further information.
Ac oil filter for a Pontiac gto?
what year GTO?, need more information to answer your question.
What is the mean of GTO in need for speed most wanted?
mean that is the mark of a car (Pontiac GTO)
What tools are needed to change rear brake pads on a 2004 Pontiac GTO?
To change the rear brake pads on a 2004 Pontiac GTO, you will need the following tools: a lug wrench to remove the wheel, a C-clamp or brake caliper tool to compress the caliper piston, a socket set or wrench to remove the caliper bolts, and possibly a torque wrench to ensure proper reassembly. Additionally, having a brake cleaner and a bungee cord or rope to hold the caliper up while working can be helpful. Always ensure you have safety equipment, such as gloves and goggles, for protection.
How to change clutch Mitsubishi gto twin turbo?
be ready for a long day, you do it from the bottom, take the tranny rails out axles, and start taking the exhaust out, then all the bolts arount the tranny, its easy i did it on my own, just be a little strong and get ready for knucle cuts.
How do you Change the headlight bulb on a Mitsubishi gto?
the answer is at http://gtouser.wordpress.com/2008/12/21/how-to-change-the-headlight-bulbs-on-a-mitsubishi-gto-or-3000gt/ so just paste this link in your web browser and you can find out. hi
What is the production number of my 2006 Pontiac gto?
The production number for your 2006 Pontiac GTO can be found on the vehicle's identification number (VIN) plate or in the owner's manual. Pontiac produced a total of approximately 13,000 units of the 2006 GTO. If you need the specific production number for your individual vehicle, you may need to contact Pontiac customer service or consult a GTO registry.
What is wrong in a 2004 gto if the clutch goes soft?
usually you have a bad slave cylinder or clutch master cylinder. check the fluid in the clutch reservoir. on drivers side next to brke master cylinder it is a small container with a black 2.5 inc cap if empty fill to fill line and pump clutch pedal until you get some resistance
How many quarts of oil does a 1968 Pontiac gto need?
5
