I just changed the flasher plug on my daughters 2000 Sunfire. Don't bother with the fuse box, it ain't there. Don't look for a 'silver round plug, it is square and green.
From the brake pedal arm, move your hand up 6 to 8 inches, have the flashers turned on so you can hear it, When you touch it, you will actually feel it blinking. It is attached to a support post. Hint, depending on the model, if you shine a flashlight through the open space below the steering column you can get a view of it. It will be attached to a support. Wiggle it out, in the direction of the radio, it will take some force. the new OEM replacement plugs do not have the piece that reattaches to the support. After I replaced the plug, and tested it, I just used a zip tie to reattach it to the support.
It took me 15 minutes to fine the plug, it took less time to remove it, replace it and reattachit.
Behind the fuse panel that is on the drivers side of the dash.
Maybe integrated with hazard module
how do you change the knock sensor in a 2003 Chevy silverado 5.3
Behind the fuse panel in the driver's side dash.
Module part of Hazard warning switch
How do you change brakes on 2003 Silverado Pick Up?
Incorporated in the hazard warning module part of the hazard switch
On the 2003 it is behind the left side of dash
Could be part of the switch assembly (Hazard warning turn signal module)
I had the same problem withj my 2003 Silverado - change the alternator..it worked for me.
To change the return filter on a 2003 Chevy Silverado is easy. Simply open the hood of your car and gently remove the filter and replace with new filter. that it!
It does not have a cable. It is all controled by the PCM. Power train control module / COMPUTER.