How do you change heater resister on a Renault laguna?

Answer 1

The heater resistor is quite simple to change. Unplug the wiring harness from the heater resistor. Remove the heater resistor retaining screws. Reverse the process to install your new heater resistor.

Answer 2

Pull out the as much of the facia around the heater controls as you can, the little box to the left and the blanking inserts above. Then remove the heater control knobs and lever off the front panel of the heater controls. The switch can be withdrawn by pushing it back and then pulling it around the side where the small storage box was to the left. It's fiddly and clearance is limited so care must be taken not to snap anything. Refitting is the reversal of the procedure.