Loosen one end of the brake line and let the fluid drain into a pan. Take the line loose and pull it out. Install the new line following the same path. Connect the line then refill the master cylinder. Bleed the wheels to get any air out.
On my 1990 Buick Regal, I need an 18mm wrench , a 10mm wrench, screwdriver, jack, and a can of brake cleaner
in removing motor mount what bolts need to be removed. This is a 1998 biuck regal 3.8L, and I am not sure how to remove the motor mount.
?need to replace the cable to a 1979 buick regal, the emergency release mechanism wire broke. Don't know how to release the brake?
I believe most brake light switches are located under the dash above the brake pedal.
Procedure to change 1988 Buick regal head gasket
VERY CAREFULLY
Remove the freon from the 91 Buick Regal with a reclaim machine. Remove the compressor belts and disconnect the lines. Unbolt and remove the compressor. Bolt in the new compressor, and connect the lines. Put the belt back on. Pull a system wide vacuum, then fill with new freon.
You have to drop fuel tank and use quick disconnect tool to change lines
Located on the firewall behind the emergency brake.
Remove the two bolts that hold calliper to bracket and disconnect brake fluid line. The bolts are probably metric #15. Bolt new calpers back in connect brake line and you will need to bleed brakes to remove air from system.
how do you change the rear license plate light on a 1999 Buick Regal
the brake light fuse is located where the brake pedal is at... just take the cover that it has above the brake pedal and you're gonna see fuses on your left....