you need to remove the drive shafts and the gearbox // but you can replace without taking the gearbox fully out the car you use screw rod of the same thread dimension on the tp two bolts of the box and slide it back far enough to carry out the job
To change the clutch on a Citroën Saxo, first ensure the car is securely lifted and supported. Remove the gearbox by disconnecting the drive shafts, starter motor, and any electrical connections, then unbolt the gearbox from the engine. Replace the old clutch with the new one, ensuring proper alignment, and reassemble the gearbox. Finally, reconnect all components and test the clutch operation before taking the car for a drive.
Change password for the start engine for citroen saxo?
were are spark plugs in citroen saxo
yes then you need to change the bonnet and slam panel and lights
Yes, you can adjust the clutch cable on a Citroën Saxo. First, locate the adjustment mechanism, typically found near the clutch pedal or at the transmission end of the cable. Use the appropriate tools to loosen the lock nut, then adjust the cable tension to achieve the desired free play at the pedal. Finally, tighten the lock nut to secure the adjustment and test the clutch operation to ensure it functions correctly.
by buying a poptart
To tighten the clutch cable on a Citroën Saxo, first, locate the cable adjuster, which is typically found near the clutch pedal or on the cable itself. Use a wrench to loosen the lock nut on the adjuster, then turn the adjuster to increase tension on the cable until the desired slack is achieved. Once properly adjusted, tighten the lock nut securely to maintain the adjustment. Finally, test the clutch operation to ensure it's functioning smoothly.
Yes but you would have to change the bonnet/front wings and slam panel.
clutch change method Nissan Almera
50 000 miles approx
how to i change a clutch in a 1993 ford ranger
How-to change clutch cover on yamaha r1?