The 2001 Toyota 4Runner has the most common hook-end wiper arms. See sources and related links below for installation videos. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.
How to replace Wiper Blades on 2003 Dodge grand caravan ?
what size wiper blades do I need for a vw 2003 bettle?
The 2003 Mercury Mountaineer has hook-end wiper arms and are easy to change. See the Sources and Related Links section below for videos on how to change wiper blades as well as what size wiper blades are on the vehicle (correct attachment and lengths). Tip: if you purchase the replacement blades first, there will also be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.
No model was given however it appears that in 2003 all models had standard hook wiper arms. See related links below.
The 2003 BMW 325xi has special BMW wiper blades that you must get at the dealer. When you purchase the blades, ask for installation instructions. There are no aftermarket wiper blades available for this vehicle.
The 2003 Chevrolet Malibu takes 22" driver side and 19" passenger side replacement windshield wiper blades.
The 2003 Toyota Echo takes 22" drivers side and 14" passenger side replacement windshield wiper blades.
You have to go to your Land Rover dealer for these wiper blades. No aftermarkets available.
The 2003 Nissan Altima takes 26" drivers side and 17" passenger side replacement windshield wiper blades.
2003 Chevrolet Silverado Pickup: 22" replacement wiper blades both sides front 2003 S Series Pickup: 20" replacement wiper blades both sides front See sources and related links below for more information.
The 2003 Toyota Sequoia has the most common hook-end wiper arms. See sources and related links below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.
This task is extremely easy and is a matter of pressing a little tab, rotating the blade a little bit and pulling it out of the hook. The replacement wiper blades will have instructions. Also, see the U-Hook wiper arm attachment video below.