there are two bolts on the top of the fog lights, pul the entire fog light out then you will see a hatch at the back of the light. open it and remove the bult
Citroen xsara Picasso dashboard light bulb is the bulb that's for the dashboard light climate control. The you tube web site gives you information as how to change the bulb.
To change the front fog light bulbs on a Citroën Picasso, first, ensure the vehicle is turned off and the keys are removed. Open the hood and locate the fog light assembly behind the front bumper. Disconnect the wiring harness from the bulb, twist the bulb holder counterclockwise to remove it, and then replace the old bulb with a new one, ensuring it's securely in place. Reconnect the wiring harness and test the fog lights before closing the hood.
HOW DO I CHANGE LIGHT BULBS
changeing side light bulb
my rear left indicator and alarm light doesnt work, hoe do I change the bulb?.
behind the headlight
To change the front head light you need to unscrew the screws to remove the protective casing. Once the protective casing has been removed the front head light bulb can be replaced with a new one.
To change the rear stop light bulb on a Citroën Picasso (Y-reg), first, open the tailgate and locate the rear light assembly. Remove the screws or clips securing the light unit, then carefully pull it out. Twist the bulb holder counterclockwise to release it, replace the old bulb with a new one, and reassemble the light unit by reversing the steps. Ensure everything is secure and test the new bulb to confirm it’s working.
To change the front head light you need to unscrew the screws to remove the protective casing. Once the protective casing has been removed the front head light bulb can be replaced with a new one.
How do you change front signal bulb on 2000 acura RL
underneith the front bumber twist counter clockwise replace bulb
To change the number plate bulb on a Citroën Zaria Picasso, first, open the rear hatch and locate the number plate light assembly. Use a flathead screwdriver or a similar tool to gently pry off the light cover. Remove the old bulb by twisting it out of the socket and replace it with a new one, ensuring it is securely fitted. Finally, replace the light cover and test the new bulb to ensure it works.