Get Silicone Gone from Home Depot, paint dept.
If they are ceramic tiles and this is the adhesive used to bond them, instructions will be on the container.
To effectively glue tile to wood, you should first ensure that the wood surface is clean and dry. Use a strong adhesive specifically designed for bonding tile to wood, such as a polyurethane construction adhesive. Apply the adhesive evenly to the wood surface and press the tile firmly into place. Allow the adhesive to cure according to the manufacturer's instructions before grouting the tile.
To fix a broken tile in your bathroom, you will need to remove the broken tile, clean the area, apply adhesive to the back of the new tile, place the new tile in position, and grout around the edges. Allow the adhesive to dry completely before using the area.
Thinset mortar. There's a special one for porcelain tile; any thinset will work for regular ceramic tile.
To properly install a tile on drywall, first ensure the drywall is clean and dry. Apply a thin layer of tile adhesive to the drywall using a trowel. Press the tile firmly into the adhesive, using spacers to maintain even spacing. Allow the adhesive to dry completely before grouting the tiles.
Cera Chem's Cerabond 28 tile adhesive
To replace a cracked floor tile, you will need to carefully remove the damaged tile using a chisel and hammer. Clean the area thoroughly, apply adhesive to the back of the new tile, and press it into place. Allow the adhesive to dry completely before grouting the tile to finish the repair.
To fix a broken tile without replacing it, you can use a tile repair kit or epoxy adhesive to fill in the crack or chip. Clean the area thoroughly, apply the adhesive, and let it dry according to the instructions. Sand down any excess adhesive and then paint or seal the repaired area to match the rest of the tile.
To replace a broken floor tile, first, remove the grout around the tile using a grout saw. Then, carefully pry up the broken tile using a chisel and hammer. Clean the area and apply adhesive to the back of the new tile before placing it in the empty space. Press down firmly and allow the adhesive to dry. Finally, reapply grout around the new tile and clean any excess.
Use a good mastic or adhesive
The most effective method for removing tile adhesive using a tile adhesive remover is to apply the remover according to the manufacturer's instructions, allow it to penetrate the adhesive, and then use a scraper or putty knife to gently lift and remove the softened adhesive.
The best practices for applying tile glue to walls for a successful and long-lasting tile installation include ensuring the wall is clean and dry, using the correct type of adhesive for the tile material, applying the adhesive evenly with a notched trowel, pressing the tiles firmly into place, and allowing sufficient time for the adhesive to dry before grouting.