answersLogoWhite

0

You dont. Minimum C is about maximum B. And the indentation is different. Even if you could convert it, the results would not be accurate.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How do you convert shore scale c to Rockwell scale c?

To convert Shore scale C to Rockwell scale C, there is no direct formula as they measure hardness differently. Shore scale C measures indentation hardness while Rockwell scale C measures depth of penetration. These two scales cannot be directly converted into one another.


When reading the steel heat treatment notation RC what does the R mean?

RC stands for Rockwell Hardness C scale; the different letters A,B,C etc. are based on different loads and indenters for measurement. C scale is typical for steels, while B scale is typical for aluminum. There are conversion tables for these if needed.


What is the Rockwell C for tin?

Approx 37.8 Rockwell "c" scale


What is the hardness of copper on rockwell scale c?

It can't be accurately converted.The softest metal on the C scale gets a 1 rating.That 1 rating is the equivalent of 82 on the B scale, which is the Rockwell scale used for copper.Copper and all it's alloys are down around the 40 range of the B scale.And you can't assume that a B scale 40 is half of a C scale 1, either. Since the tests use different metal ball sizes, it's an issue of being an unequal scale.


How hard is a diamond in Rockwell Scale c?

Diamond is more than 1000 times harder than quartz, which is in the 80 range in the Rockwell C. Diamond cannot be measured on the Rockwell C scale. A diamond pyramid is actually used in the Rockwell C test, which would be inconclusive.


What is the Hardness Rockwell C scale?

This is a method used to determine the hardness of a metal. If you know the type of metal and the hardness, this will tell you the Tensile Strength of the metal and how well it was heat treated. The method uses a ball or a pin to strick the metal and leave a small indention. The size and depth that the ball makes in the metal is inversely proportional to the hardness. Using the scale, you can then determine if the part has completed the proper heat treatment as required by the Engineering drawing. There are 3 Rockwell scales: A, B, C. Rockwell C scale is for the hardest of metals such as steel. Rockwell B is for metal such as soft aluminum and A is for even softer metals.


A very hard tool steel will probably register about 70 on the what scale?

Rockwell C scale


How hard is HRC 56?

It depends on the type of scale.... rockwell A,B,C..... and the type of diamond used if you have that data, use this chart. http://www.carbidedepot.com/formulas-hardness.htm


How hard is a file on the Rockwell scale?

The Rockwell scale measures the hardness of materials, particularly metals, using a standardized method that involves applying a specific load to an indenter and measuring the depth of penetration. Different Rockwell scales (e.g., A, B, C) are used for various materials, with the C scale commonly applied to harder materials like steel. The scale provides a straightforward numerical value that indicates hardness, where higher numbers correspond to harder materials. Thus, the hardness of a file, which is typically made from high-carbon steel, would be relatively high on the Rockwell scale, often around 60 HRC or more.


What is this a a a b a a a b a a a b a b a a a b a a a b c c a b c c?

It's the first three notes of an a minor scale.


What is HRC in rockwell testing machine?

HRC stands for Hardness Rockwell C scale. There are different scales; C is probably the most common for hardened materials. See the related link for more information.


What are the notes in the major scales to stay in key?

The a major scale is a,b,c#,d,e,f#,g#,a. the b major scale is b,c#,d#,e,f#,g#,a#,b. the c major scale is c,d,e,f,g,a,b,c. the d major scale is d,e,f#,g#,a,b,c#,d. the e major scale is e,f#,g#,a,b,c#,d#,e. the f major scale is f,g,a,b-flat,c,d,e,f. the g major scalle is g,a,b,c,d,e,f#,g.