For those who don't know, French polishing is a technique, not a material. You start with flake shellac 10% by weight, dessolve in denatured alcohol. Once your finish is ready, use a lint free pad and apply a very wet coat....let stand for 5 min. apply 3 or 4 more coats resting the 5 min. in between. When it becomes lumpy & sticky let it rest another 5 to 10 min. Now put 1 or 2 drops of either lemon or walnut oil on your project and smear around with your finger, (this is for lubrication). Now is the time when French Polishing starts, this is "VERY" lobor intensive, now you rub & rub adding a drop of oil to keep from sticking from time to time, (try not to use to much oil, or it will become part of the finish, you want to keep it at a minimum). the trick is to watch the vapor trail of the alcohol, no vapor trail your removing the finish, keep a small vapor trail when your applying, keep RUBBING until you have a mirror finish. NOTE: you can get the same kind of finish with modern products & equipment (spray-guns) and spend less time with a LOT-LESS work. French Polishing is a very old technique. Good-Luck with all your work
French polishing can enable one to achieve deep color and shine. This wood finishing technique results in a very glossy surface of furniture.
French Polishing is a technique of wood finishing that leads to a high gloss surface with a darker colour. This process became popular in the 18th century and was commonly used on different types expensive woods.
There are a number of sites where one can find tips on French polishing a table. One can find this information on the About website under the topic of 'woodworking' and the M & S French Polishing website.
The wood treatments that can bring back color and life into old furniture is wood polishing. Basically the best product that can accomplish the wood polishing is Old English product.
A polishing machine is a tool or equipment used to smooth and shine the surface of various materials such as metal, wood, or plastic. It typically consists of a rotating wheel or disk that is covered with an abrasive material like sandpaper or polishing pads to achieve a smooth finish. Polishing machines are commonly used in industries such as manufacturing, automotive, and woodworking.
"Bois" in French translates to "wood" in English.
To enhance the appearance and durability of wooden furniture, the best techniques for applying wood polishing oil include cleaning the surface, applying the oil in thin, even coats with a soft cloth or brush, allowing it to penetrate the wood, and buffing it to a shine. Repeat the process as needed to maintain the finish.
David Slater has written: 'French polishing and varnishing' 'Underdevelopment and spatial inequality'
It is a big job to attempt as an amateur if there is a large amount of wood flooring, firstly the work will require a lot of equipment and time for sanding, staining the wood, allowing it to dry and polishing it.
Colors of polishing pad depends on the manufacturer of the polishing pad and describes the grade (level of cut) of the polishing. Some examples are: Meguiars: Burgundy (Cutting), Yellow (Polishing), Tan (Finishing) Menzerana: White (Cutting), Orange (Polishing) Sonus: Yellow (Cutting), White (Polishing), Red (Finishing)
bois
Fine abrasive materials are used in the process of polishing surfaces to remove imperfections and create a smooth finish. This abrasive action helps in achieving a desired level of shine or texture on various materials such as metal, wood, and stone.