this link is prettyh usefull http://www.vwwatercooled.org.au/newforum/upload/showthread.php?t=24357
Pedal Box is where the pedals are held and pivoted, a inflexible structure is typically required; in impact, the pedal box can be forced in on a driver's lower leg and feet leading to significant injury.
to remove the pedal box the whole dash has to be taken out, absolute pain in the ass
are ..http://oldschool.co.nz/2011/forum/index.php?/topic/22984-escort-adjustable-pedal-box-plans/
To remove the pedal box in an EF Falcon, start by disconnecting the battery and removing the lower dash panel for access. Next, unbolt the brake and clutch master cylinders from the pedal box, and detach the clutch cable if applicable. Then, remove the bolts securing the pedal box to the firewall and gently pull it out, being cautious of any wiring or linkages that may still be connected. Finally, ensure all components are safely disconnected before fully removing the pedal box from the vehicle.
About 3.14% can fit in a box of malk
There are 2 syllables in the word pedal, divided as follows:pe\dal
The fuse box in the 996 (911) is in the lateral wall of the pedal well, to the left of the clutch pedal.
Left Of Brake Pedal
WILL A 240SX COMPUTER BOX FIT IN A KA24E HARDBODY
To create a box fit text effect in After Effects, you can use the "Text Box" feature to adjust the size of the text box to fit the text. This will automatically resize the box to match the length of the text. You can also use the "Scale" property to adjust the size of the text layer itself to fit within the box.
The fuse box is located under the steering wheel above the brake pedal.
Under the dash behind the brake pedal