answersLogoWhite

0

To change an exterior door handle on a 92 Mustang, you'll need to take the interior door panel off, the only way to reach it is behind the interior door panel. Make sure the window is rolled all the way up, because if it is down, it's impossible to get to. The only thing I'm not sure of, is I don't know if Ford riveted or bolted in the handles from the factory. Luckily when I changed mine, they were bolted in. After you remove the interior panel, you'll have to pull the post out of the clip that connects the door handle to the latch. Don't pull the post out of the clip at the latch, pull the post out of the clip up at the handle. Then, if it is bolted in, remove 2 nuts that hold the handle in place. If the handle is riveted in, you're going to have to attempt to drill out the rivets. After that is done, remove the handle, install the new one. Your new handles will be a bolt in. So, just tighten the nuts on the bolts, replace the post into the clip at the door handle, install the door panel and you're done!

User Avatar

Wiki User

10y ago

What else can I help you with?

Related Questions

How do you fix pull car door handle on mini van?

Depends on what is wrong with the handle. You will more than likely have to remove the door panel in order to find out what is wrong.


How do you fix a loose Kwikset door handle?

You can easily fix a lose Kwikset door handle by taking the appropriate screwdriver and tightening the screws that attach the door handle to the door frame.


IF your car door handle will not open from the inside how do you fix it?

Take off the door panel. the plastic clip that holds the metal rod to the door handle came off or broke off. replace it.


How do you fix a broken door handle?

Just replace it with another door handle. This is easier since you don't have to take the time to fix it.


If your car door handle will not open or unlock from the outside how do you fix it?

remove enter door panel. check the latch rod from handle to keeper spring latch (lock). either bent or detached. end.


How can I fix a loose door handle?

To fix a loose door handle, you can tighten the screws on the handle using a screwdriver. If the screws are stripped, you may need to replace them with longer or thicker screws.


What is the function of the outside door handle on a car?

The outside door handle on a car allows the driver or passengers to easily open the door from the outside by pulling or lifting the handle.


How do you fix a door handle on a 2003 Lincoln town car?

Need to know what's wrong with it. Regardless, you'll probably need to get a trim puller and remove the trim from inside the door for whatever repair you'll be making to the door handle.


How can you get out from a car?

open the car door with the handle


How do you fix a broken door handle if the car has side impact airbags for 98 Volvo V90?

Airbags are not in the door, but rather in the seat. Should be no additional issue at all.


How do you fix the door handle of a VT commodore?

To fix the door handle of a VT Commodore, remove the hardware from the door and loosen the knob. Remove the turn post and tighten all mechanical parts.


How much would it cost to fix a doorhandle on a Chevy Cobalt?

how much does it cost to fix a door handle to a 2007 chevy colbalt Ls the inside cables inside handle and out side door handle