I haven't been able to. I disconnected my air cond. so it wouldn't blow hot air.
dex-cool Dex-cool is anitfreeze which goes in the radiator and cooling system. As for Freon which goes in the air conditioning system, the 97 Volvo uses R134A Freon.
Check freon level first
1. Low on freon. 2. Electrical problems. 3. Vacuum problems. 4. Control head problems.
No. Dex-cool is an engine coolant. Freon (134r) is a gas used in the automotive AC system.
Yes
Yes, refrigerators typically use a refrigerant called freon to cool the air inside the appliance.
Add freon
No. You can loose volume and not cool as well, but as long as the amount of freon in a given system remains the same it will cool. The cooling properties come from the freon changing from liquid to gas and back again. It doesn't wear out.
To add Freon to a 1997 Volvo 850 T5, first locate the low-pressure service port, usually found on the larger of the two refrigerant lines connected to the AC system. Ensure the engine is running and the AC is set to the maximum cool setting. Attach the refrigerant can to the low-pressure port, then slowly release the Freon while monitoring the pressure gauge on the canister to avoid overfilling. Always wear safety gear and consider having a professional check the system for leaks or issues if you're unsure.
To add Freon to a 1995 Volvo 960, first ensure the engine is running and the AC system is set to the maximum cool setting. Locate the low-pressure service port, typically found on the larger diameter aluminum line; remove the cap. Connect the refrigerant can to the port, following the instructions on the can for proper use, and add Freon until the pressure gauge indicates it's within the recommended range. Always wear safety goggles and gloves, and consider consulting a professional if you're unsure.
Yes, refrigerators typically contain a refrigerant called freon, which is used to cool the air inside the appliance.
To add Freon to a 2001 Volvo S80, first ensure the engine is off and the AC is set to the maximum cool setting. Locate the low-pressure service port, typically found on the larger diameter AC line. Use a refrigerant can with a gauge and connect it to the port, then follow the manufacturer's instructions to add the refrigerant slowly while monitoring the gauge. Be cautious not to overfill, and always wear safety goggles and gloves when handling refrigerants.